05.01.05
Phase A-1 | |
Water (demineralized) | 67.76 |
Tetrasodium EDTA | 0.10 |
Sorbitol (Liponic 70-NC/Lipo) | 3.00 |
Allantoin (RonaCare Allantoin/Rona) | 0.20 |
Aloe vera gel (Aloe Vera Gel 10X/Terry Labs) | 1.00 |
Phase A-2 | |
Xantham gum (Vanzan NF/Vanderbilt) | 0.50 |
Magnesium aluminum silicate (Veegum HS/Vanderbilt) | 5.50 |
Kaolin (Colloidal Kaolin/Whittaker) | 12.00 |
Phase B | |
Cetearyl alcohol, cetearyl glucoside (Montanov 68/Seppic) | 5.00 |
Sweet almond oil (Lipovol ALM/Lipo) | 2.00 |
Capric caprylic triglycerides (Myritol 318/Cognis) | 3.00 |
Shea butter (Cetiol SB-45/Cognis) | 2.50 |
Beeswax (White Beeswax/Strahl & Pitsch) | 3.00 |
Bisabolol (RonaCare Bisabolol Nat./Rona) | 0.20 |
Phase C | |
Water (demineralized) | 5.00 |
Emblica officinallis extract (Emblica/Rona) | 1.00 |
Phase D | |
Sodium citrate (50% sol) (to pH- 5.0) | 0.20 |
Phase E | |
D&C Green #3 (1% sol) | 0.04 |
Fragrance (Fresh & Clean # Frag. 101077/Intarome) | 0.10 |
DMDM hydantoin, methylparaben, propylparaben (Paragon II/McIntyre) | 1.00 |
Procedure | |
Combine A-1; disperse A-2 in A-1 while stirring and heat A to 70°C. Combine ingredients of phase B, then heat to 70°C. Add phase B to A with good mixing. Homogenize mixture at moderate speed while cooling to 40°C. When temperature reaches 40°C, add premixed phase C; stir gently until mixture is homogeneous. Adjust pH with phase D to 5.0 then add ingredients of phase E in the listed order. Mix until uniform. | |
More Information | |
Rona Cosmetics/EMD Chemicals, Inc., 7 Skyline Drive, Hawthorne, NY 10532 Tel: (914) 592-4660; Fax: (914) 592-9469; Website: www.emdchemicals.com |