Welcome Guest to Happi

Subscribe Free: Magazine | eNewsletter

current issue December 2014
 •  Antitrust Regulator in France Fines Major Companies  •  Paradigm Science‚Äôs Cervino Wins Award  •  Aquaphor Taps Brooke Burke  •  Shea Radiance Gets A Makeover  •  A Sustainable P&G
Print

Daily Moisturizer with SPF 15



Published February 1, 2006
Post a comment

Phase A
Deionized water
50.09
Disodium EDTA (America Int.)
0.10
Lucentite SWN (Kobo Products) (Lithium magnesium sodium silicate)
0.70
Glycerin-96% (RITA Corp.)
10.00
Keltrol CG (Kelco) (Xanthan gum)
0.15
SP-10L (Kobo Products) (Nylon 12)
1.00
BPA-500 (Kobo Products) (Polymethylmethacrylate)
1.00

Phase B
Lipomulse 165 (Lipo Chemicals) (Glyceryl stearate [and] PEG-100 stearate)
4.00
Parsol MCX (Roche) (Ethylhexyl methoxycinnamate)
7.50
RITA SA (RITA Corp.) (Stearyl alcohol)
2.00
Stearic acid (Lipo Chemicals)
1.00
RITA Cetearyl Alcohol 50/50 (RITA Corp.)
0.75
Crodamol ICS (Croda) (Isocetyl stearate)
4.00
SF1256 (GES/Kobo Products) (Cyclopentasiloxane [and] Cyclohexasoloxane)
5.00

Phase C
Water
2.00
RITA TEAlan 99 (RITA Corp.) (Triethanolamine)
0.25

Phase D
CM3K40T4 (Kobo Products) (Cyclopentasoloxane [and] titanium dioxide [and] PEG-10 Dimethicone [and] alumina [and] methicone)
5.50

Phase E
Phenonip (Nipa Labs) (Phenoxyethanol [and] methylparaben [and] propylparaben [and] ethylparaben [and] butylparaben [and] isobutylparaben)
1.25

Phase F
Sodium Hyaluronate 1% Solution (TAOS)
0.50
AC DRF 25% (Active Concepts) (Saccharomyces lysate extract)
1.00
RITAloe 1X (RITA Corp.) (Aloe barbadensis juice)
1.00
Fragrance
0.20
HV45-PM20 (Kobo Products) (Mica [and] titanium dioxide [and] polymethylmethacrylate)
1.00
D&C Red 33 (W 083) 1% sol. (LCW)
0.01

Procedure
Charge water to main tank and begin mixing with propeller agitation. Add disodium EDTA and Lucentite. Continue mixing. Pre-blend glycerin and Keltrol. Add to main tank and continue mixing. Begin heating to 75-78°C. Add powders and stir for 15 minutes. Combine phase B in side container and heat to 78-82°C. Mix with propeller agitation to insure uniformity. When both phase A and phase B have reached temperature, charge phase B into phase A. Continue mixing with propeller agitation for 15 minutes maintaining temperature. Begin cooling. Combine phase C in side container and mix until solution is clear. When batch temp. has cooled to 65°C, add TEA. Batch will slightly thicken. When batch has cooled to 60°C, switch mixing to homogenization. Charge TiO2 dispersion into batch and mix for 15 minutes. Continue cooling. Add preservative to batch and continue homogenization. When batch temperature is at or below 50°C, charge remaining ingredients and continue to homogenize for 10 minutes. Switch to side sweep agitation for remainder of cool down.

More Information
Kobo Products, Inc.
690 Montrose Ave. & 3474 S. Clinton Ave.
South Plainfield, NJ, 07080
Tel: (908) 757-0033; Fax: (908) 757-0905
Website: www.koboproducts.com


blog comments powered by Disqus