Welcome Guest to Happi

Subscribe Free: Magazine | eNewsletter

current issue July 2015
 •  Q2 Sales Slip at Avon  •  Colgate Banks on Innovations to Boost Sales  •  Annual Sales Down at P&G  •  Taylor To Succeed Lafley at P&G  •  Revlon Reports Q2
Print

Glittering Clear Gel with Cosmospheres



Published September 1, 2006
Post a comment

Phase A
Deionized water
54.15
Zilgel SM (Presperse) (Glycerin [and] water [and] sodium polyacrylate)
32.50
Butylene glycol (Ruger Chemical)
6.50
Zilgel Oil (Presperse) (Glycerin [and] water [and] sodium polyacrylate [and] PVM/MA copolymer)
5.00

Phase B
Prespearl Sparkly Star (Presperse) (Mica [and] titanium dioxide)
0.10

Phase C
Germaben II (ISP) (Propylene glycol [and] diazolidinyl urea [and] methylparaben [and] propylparaben)
1.00

Phase D
Cosmospheres BCG-L (Presperse) (Polyethylene terephthalate [and] lactose [and] microcrystalline cellulose [and] ultramarines [and] acrylates copolymer)
0.75

Procedure
Charge deionized water into a main kettle and very slowly start mixing with paddle mixer. Add the remaining ingredients in sequence while the batch is mixing. Mix the batch very gently and slowly to avoid air entrapment. Add phase B into phase A and agitate gently in circular motion until the powder is thoroughly dispersed. Add phase C into phases AB and mix slowly until uniform. Add phase D into phase ABC and mix gently so as not to break the beads until uniformly suspended into the batch. Fill appropriate containers.

More Information
Presperse, Inc., 635 Pierce St., Somerset, NJ 08873
Tel:  (732) 356-5200; Fax: (732) 356-3533; Website: www.presperse.com


blog comments powered by Disqus