Welcome Guest to Happi

Subscribe Free: Magazine | eNewsletter

current issue July 2014
 •  Professional Division Lifts Revlon in Third  •  Sunscreen Innovation Act Gets Passed in the House  •  Strong Personal Care Results Can't Lift Energizer in Q3  •  FloraTech Gets New Distributor, Warehouse  •  Herbalife Misses Mark in Q2
Print

2-in-1 Conditioning Shampoo



Published May 1, 2007
Post a comment
1. SoftCAT SL-30 polymer (1.5% aq.)
18.70
2. Polyox WSR N-750 (1% aq.) (PEG-7M)
5.00
3. Methocel 40-202 (5% aq.) (Hydroxypropyl methylcellulose)
2.00
4. Sodium laureth sulfate (2 moles-26% active)
60.78
5. Disodium amphodiacetate (50% active)
6.92
6. Ethylene glycol distearate
2.00
7. Silicone Emulsion DC #1664 (Amodimethicone (and) tallowtrimonium chloride (and) nonoxynol-10)
2.00
8. Citric acid (10% aq.)
2.20
9. DMDM hydantoin
0.40
10. Fragrance
q.s.

Procedure
Prepare a 1.5% solution of SoftCAT SL-30 polymer by sprinkling into agitating, room temperature water. Allow to disperse completely before beginning to heat slowly, with mixing, to 60-65°C. Let cool to room temperature before use. Solution should be crystal clear. Prepare a 1% solution of Polyox WSR N-750 by sprinkling into room temperature rapidly agitating water. Allow polymer to dissolve completely. Prepare a 5% solution of Methocel 4-202 by sprinkling into room temperature rapidly agitating water. Allow polymer to disperse completely. Adjust pH to at least 8.5 using NaOH (10% aq.) to fully hydrate the polymer. Combine sodium laureth sulfate, disodium amphodiacetate and EGDS. Mix with heating to 70-75°C until all the EGDS is melted and uniform. Continue stirring at thsi temperature for 45 minutes then add citric acid solution. Begin to cool slowly to 35°C. Add silicone emulsion with mixing and continue stirring for another 90 minutes. Once complete, slowly add the polymer solutions while mixing. Once all the solutions are added continue mixing for 60 minutes. Cool to room temperature; add preservative, fragrance and color.

Properties
Viscosity 40,000-50,000 cPs (20°C, 6,10 rpm) pH 5.8-6.2.

More Information
Amerchol Corporation, a subsidiary of Dow Chemical
Tel (800) 367-3534; Fax: (989) 832-1465; Website: www.amerchol.com


blog comments powered by Disqus