Welcome Guest to Happi

Subscribe Free: Magazine | eNewsletter

current issue July 2014
 •  LVMH Beauty Records Gain in First Half  •  Dermalogica Face Mapping Takes Center Stage  •  P&G Looks to Reduce Palm Oil's Environmental Impact  •  Exchange Rates Dent Unilever  •  Big Green Boxes Big at Swiffer
Print

Mommy n' Me Bubbly Amide-Free Baby Shampoo



Published August 1, 2007
Post a comment
Deionized water
60.29
Versene 100 (Dow Chemical) (Tetrasodium EDTA)
0.20
Glucquat 125 humectant (Lubrizol) (Lauryl methyl gluceth-10 hydroxypropyldimonium chloride )
0.10
Sulfochem TD-3 surfactant (Lubrizol) (Sodium trideceth sulfate (30%)
10.00
Atlas G-4280 (Uniqema) (PEG-80 sorbitan laurate)
8.00
Chembetaine C Surfactant (Lubrizol) (Cocamidopropyl betaine (35%)
11.50
Miranol HMA (Rhodia) (Sodium Lauroamphoacetate (40%)
4.00
Glucamate LT Thickener (Lubrizol) (PEG-120 methyl glucose trioleate, propylene glycol, water (40% active)
5.50
Glydant Plus Liquid (Lonza) (DMDM hydantoin (and) iodopropynyl butylcarbamate)
0.40
Citric acid (50%)
0.01

Procedure
In a suitable vessel, dissolve EDTA in deionized water.  Add ingredients 3-7 to the batch slowly, one at a time, with mixing.  Mix batch slowly at about 200 rpm while heating to 70°C. Mix until uniform.  When batch is uniform and at 70°C, add Glucamate LT Thickener and mix at 400 rpm for 5-10 minutes. Reduce mixing speed to 200 rpm and allow batch to cool. Add ingredient 9 when temperature reaches 40°C. Adjust pH with citric acid to 5.8-6.2.  Adjust final viscosity with sodium chloride if necessary.

More Information
Noveon Consumer Specialties, 9911 Brecksville Road Cleveland, OH 44141-3247
Tel: 216.447.5000,  800.379.5389. Fax: 216.447.5250


blog comments powered by Disqus