Formulary

Clear Bodywash

September 1, 2007

Deionized water
75.57
Natrlquest 30 E30
0.63
Tauranol SCMI-85
6.30
Sodium laureth sulfate (70%)
10.00
Cocamidopropyl betaine
5.00
DMDM hydantoin
0.50
50% Citric acid solution
adjust pH 5.5-6.0
NaCl
1.50-2.00
Deionized water
q.s.

Procedure
Dissolve Natrlquest E30 in deionized water. With smooth mechanical agitation, slowly blend Tauranol SCMI-85 into system. Begin heating to 50-60°C and mix until completely dispersed. Blend in sodium laureth sulfate and cocamidopropyl betaine. Cool system to 30-35°C, add DMDM hydantoin and mix until uniform. Adjust pH to 5.5-6.0 with citric acid solution as needed. Add sodium chloride incrementall as needed to achieve a viscosity of 6,000-8,000cps. Q.S. system to 100% with deionized water as needed.

MORE INFO:
Innospec, 379 Thornall St., Edison, NJ 08837
Tel: (732) 321-3500; Fax: (732) 321-3519 Website: www.innospecinc.com
blog comments powered by Disqus
  • Back to School

    Back to School

    Tom Branna, Editorial Director||September 1, 2016
    It may be September, but class was in session this summer during the Private Label Manufacturers Association’s Executive Educ

  • How Green Is Your Surfactant?

    How Green Is Your Surfactant?

    Tom Branna, Editorial Director ||September 1, 2016
    Suppliers offer a range of solutions to help household and personal care product formulators develop formulas

  • New Surfactants

    Tom Branna, Editorial Director ||September 1, 2016
    Here’s a list of new ingredients introduced by surfactant suppliers