Welcome Guest to Happi

Subscribe Free: Magazine | eNewsletter

current issue May 2015
 •  US Economy Slips in Q1  •  Gojo To Expand Footprint  •  "Break Up with Your Makeup"  •  Ulta Posts Strong Q1  •  Fortunate Ones
Print

Illuminating Lotion from Lipo Chemicals



Published July 1, 2008
Post a comment

Phase A
Deionized water
75.47
Carbopol Ultrez 10 (Noveon) (Carbomer)
0.11
Keltrol CG (CP Kelco) (Xanthan gum)
0.10
Liposerve PP (Lipo Chemicals) (Phenoxyethanol (and) methylparaben (and) ethylparaben (and) butylparaben (and) propylparaben (and) isobutylparaben)
1.00
Lipopeg 39S (Lipo Chemicals) (PEG-40 stearate)
1.00
Lipowax P (Lipo Chemicals) (Cetearyl alcohol (and) polysorbate 60)
0.50
Lipocol C (Lipo Chemicals) (Cetyl alcohol)
1.25
Liponate GC (Lipo Chemicals) (Caprylic/capric triglyceride)
8.00
Liposerve IU (Lipo Chemicals) (Imidazolidinyl urea)
0.30

Phase B
Lipo GMS-450 (Lipo Chemicals) (Glyceryl stearate)
2.75

Phase C
TEA 99% (Ruger Chemical Co.) (Triethanolamine)
0.17

Phase D
LipoLight OAP/PVA (Lipo Chemicals) (Polydodecanamideaminium tri- azadiphenylethenesulfonate (and) polyvinylalcohol crosspolymer)
3.00

Phase E
Lipobrite HCA-4 (Lipo Chemicals) (PEG-4 (and) hydroxycinnamic acid)
4.50

Phase F
Sodium hydroxide (18% sol.)
0.85

Phase G
Deionized water
1.00

Procedure
In main kettle, weigh out the water, add Ultrez 10 and begin heating to 80˚C with propeller  agitation.     Premix xanthan gum and Liposerve PP. Add to main vessel, maintain heat at 80˚C with propeller mixing. In side kettle, combine Phase B ingredients and heat to 80˚C. Mix until uniform. Slowly add Phase B to Phase A and mix for 15 minutes until emulsification is  complete. Add Phase C to batch as a neutralizing agent and mix well.  Begin cooling batch with continued mixing. At 40˚C – 50˚C, add Phase D and Phase E to batch with continued mixing.     Adjust pH to between 6.25 and 6.50 with addition of Phase F Homogenize batch for five minutes. Add premixed Phase G ingredients, mix while cooling, shutdown at 32˚C.

Properties
pH: 6.25-6.50
Viscosity:  LV T-F helipath @ 1.5rpm = 125,600 cps ± 10%

More Information
A lotion that leaves skin feeling soft and younger looking. LipoLight OAP/PVA helps diminish the appearance of wrinkles, blemishes and imperfections while Lipobrite HCA-4 helps diminish the appearance of dark spots and aids in creating an even skin tone.

More Information
Lipo Chemicals, Inc., 207 Nineteeth Avenue, Paterson, NJ
(973) 345-8600, Fax (973) 345-8365, Website: www.lipochemicals.com


blog comments powered by Disqus