10.01.08
Phase A | |
Dow Corning 9011 silicone elastomer blend (Cyclopentasiloxane (and) PEG-12 dimethicone crosspolymer) | 20.0 |
Dow Corning EL-8040 ID silicone organic blend (Isododecane (and) dimethicone crosspolymer) | 5.0 |
Myritol 318 (Henkel KGaA) (Caprylic/capric triglyceride) | 3.0 |
Dow Corning 4002 ID silicone acrylate (Acrylates/polytrimethylsiloxy- methacrylate copolymer) | 3.0 |
Promyristyl PM-3 (Croda, Inc.) (PPG-3 myristyl ether) | 0.5 |
Sodium chloride | 1.0 |
Glycerin | 5.0 |
Sodium laureth sulfate (30%) | 0.5 |
Dow Corning 1503 Fluid (Dimethicone (and) dimethiconol) | 3.0 |
Iron oxides yellow | 0.9 |
Iron oxides red | 0.4 |
Iron oxides black | 0.1 |
Titanium dioxide | 11.6 |
Phase B | |
Water | 42.5 |
Phase C | |
Dow Corning 5562 Carbinol Fluid (Bis-hydroxyethoxypropyl dimethicone) | 3.5 |
Procedure | |
Premix phase C until homogeneous. Combine phase A ingredients. Add phase C to phase A and mix until homogeneous. Combine phase B ingredients until homogeneous. Slowly add phase B to phase A using high speed mixing. Mix with high shear (avoid aeration) until uniform. | |
More Information | |
Dow Corning Corporation, Midland, MI, Tel: (989) 496-6000; Fax: (989) 496-5508 lifesciences@dowcorning.com, Website: www.dowcorning.com/content/personal/ |