08.01.07
Deionized water | 60.29 |
Versene 100 (Dow Chemical) (Tetrasodium EDTA) | 0.20 |
Glucquat 125 humectant (Lubrizol) (Lauryl methyl gluceth-10 hydroxypropyldimonium chloride ) | 0.10 |
Sulfochem TD-3 surfactant (Lubrizol) (Sodium trideceth sulfate (30%) | 10.00 |
Atlas G-4280 (Uniqema) (PEG-80 sorbitan laurate) | 8.00 |
Chembetaine C Surfactant (Lubrizol) (Cocamidopropyl betaine (35%) | 11.50 |
Miranol HMA (Rhodia) (Sodium Lauroamphoacetate (40%) | 4.00 |
Glucamate LT Thickener (Lubrizol) (PEG-120 methyl glucose trioleate, propylene glycol, water (40% active) | 5.50 |
Glydant Plus Liquid (Lonza) (DMDM hydantoin (and) iodopropynyl butylcarbamate) | 0.40 |
Citric acid (50%) | 0.01 |
Procedure | |
In a suitable vessel, dissolve EDTA in deionized water. Add ingredients 3-7 to the batch slowly, one at a time, with mixing. Mix batch slowly at about 200 rpm while heating to 70°C. Mix until uniform. When batch is uniform and at 70°C, add Glucamate LT Thickener and mix at 400 rpm for 5-10 minutes. Reduce mixing speed to 200 rpm and allow batch to cool. Add ingredient 9 when temperature reaches 40°C. Adjust pH with citric acid to 5.8-6.2. Adjust final viscosity with sodium chloride if necessary. | |
More Information | |
Noveon Consumer Specialties, 9911 Brecksville Road Cleveland, OH 44141-3247 Tel: 216.447.5000, 800.379.5389. Fax: 216.447.5250 |