Welcome Guest to Happi

Subscribe Free: Magazine | eNewsletter

current issue July 2014
 •  Herbalife Misses Mark in Q2  •  Ecolab's Q2 Sales Rise 7%  •  Mixed Quarter at Herbalife  •  Essie Fall Colors Are ‘Dressed to Kilt’  •  Sephora Picks Up Briogeo
Print

Water-Resistant Mascara



Published January 1, 2009
Post a comment

Phase A
Deionized water
47.24
Veegum HV (R.T. Vanderbilt) (Magnesium aluminum silicate)
0.20
Keltrol (Kelco Corp.)(Xanthan gum)
0.20
Methylparaben (Ruger Chemical Co.)
0.25
Trisodium EDTA (Ruger Chemical Co.)
0.01
Iron Oxide Black (Sun Chemical)
9.00
Carnuba wax (Hansotech)
4.50
Panalane H-300E (Lipo (Ineos) (Hydrogenated polyisobutene)
5.50
Lipo Stearic Acid (Lipo Chemicals)
3.00
Liposorb SQO (Lipo Chemicals) (Sorbitan sesquioleate)
1.30
Propylparaben (Ruger Chemical Co.)
0.20
Liponate NEB (Lipo Chemicals) (C12-15 alkyl benzoate)
1.00
Liposerve IU (Lipo Chemicals)
0.10

Phase B
Lipo PE Base G-55 (Lipo Chemicals) (Glycerin (and) polyester-5)
12.00

Phase C
Rose Talc (Presperse) (Talc)
3.00

Phase D
Triethanolamine, 99% (Ruger Chemical Co.)
1.50

Phase E
Lipobee 102 (Lipo Chemicals) (Synthetic beeswax)
10.00

Phase F
Deionized water
1.00

Procedure
In main kettle, combine phase A ingredients and heat to 70°C. Mill phase A in a colloid mill.  Add phases B and C and continue milling until pigment is dispersed uniformly.  Add phase D. In a separate kettle, combine phase E ingredients and heat to 80-84°C. Heat combined phases A, B, C and D (water phase) pigment grind to 80-84°C and mix slowly to deaerate the batch. Add combined phase E to batch under slow sweep and emulsify the batch. Cool to 35°C, and add premixed phase F. Pour the batch at 30°C into a suitable container.

More Information
Lipo Chemicals, Inc., 207 Nineteeth Ave., Paterson, NJ
(973) 345-8600, Fax (973) 345-8365, Website: www.lipochemicals.com


blog comments powered by Disqus