Welcome Guest to Happi

Subscribe Free: Magazine | eNewsletter

current issue December 2014
 •  Charlotte Tilbury Channels Hollywood  •  Croda Reveals Findings on Volarest FL  •  Lubrizol Joins Roundtable on Sustainable Palm Oil  •  Antitrust Regulator in France Fines Major Companies  •  Paradigm Science’s Cervino Wins Award
Print

Fluid Foundation



Published August 1, 2010
Post a comment

Phase A
Dow Corning ES-5612 (PEG-10 dimethicone)
8.00
Xiameter PMX-200 silicone fluid, 5 cSt (Dow Corning) (Dimethicone)
7.57
Dow Corning FZ-3196 (Caprylyl methicone)
7.57
Dow Corning 5200 (Lauryl PEG/PPG-18/18 methicone)
0.80
Dow Corning VM-2270 Aerogel Fine Particles (Silica silylate)
0.30

Phase B
Water
51.00
Glycerin
5.00
Sodium chloride (Sodium chloride) (VEL)
1.00
Euxyl PE 9010 (Schulke & Mayr) (Phenoxyethanol (and) ethylhexylglycerin)
1.00

Phase C
SA-C47051 (Miyoshi Kasei) (Titanium iron oxide (and) dimethicone)
9.66
C33-1700 (CI 77492) (Sun Chemical Corporation)
1.81
C33-2199 (CI 77491) (Sun Chemical Corporation)
0.42
C33-5000 (CI 77499) (Sun Chemical Corporation)
0.12
Dow Corning FZ-3196 (Caprylyl methicone)
5.45

Phase D
Perfume (Domino 246519) (Symrise)
0.30

Procedure
Prepare a pigment premix by blending phase C ingredients with a three-roll mill, and homogenize until uniform in color. Combine ingredients of phase A and phase C, mixing until homogeneous. Combine ingredients of phase B. Slowly add phase B into phase AC, while gradually increasing mixing speed (800 to 1100 rpm). When B is completely added, add phase D with mixing. Mix for an additional 5 minutes at 2000 rpm.

More Information
Dow Corning Corporation
(989) 496-6000 • Email: lifesciences@dowcorning.com
Website: www.dowcorning.com/content/personal/


blog comments powered by Disqus