03.22.16
Phase A | |
Water (Aqua) (deionized) | 59.00 |
Guanidine Carbonate | 27.00 |
Phase B | |
Calcium Hydroxide | 5.00 |
Phase C | |
Petrolatum | 9.10 |
Mineral Oil (Paraffinum Liquidum) | 6.50 |
Polyquaternium-37, Mineral Oil (Paraffinum Liquidum), PPG-1 Trideceth-6 | 1.00 |
PEG-75 Lanolin | 1.00 |
Cocoa Butter–Certified Organic (HallStar) (Theobroma Cacao (Cocoa) Seed Butter) | 0.20 |
Olive Oil - Ultra Refined (HallStar) (Olea Europaea (Olive) Fruit Oil) | 0.10 |
Phase D | |
HallStar NCD-20 (HallStar) (Cetearyl Alcohol, Ceteareth-20) | 13.00 |
Phase E | |
Vitamin E Natural (HallStar) (Tocopherol) | 0.10 |
Procedure | |
Activator: Add the water of phase A to the main vessel. Start mixing and slowly add the Guanidine Carbonate. Heat this water phase to 75°C. In a separate vessel, combine phase B. Heat this oil phase to 75°C, then add phase C. When both phases are homogeneous and at 75°C, slowly add BC to A with prop mixing. After 5 minutes, start cooling. Add phase D ingredients in order when batch is at 50°C. Stop cooling when batch is at 30°C. Add water to correct for evaporative loss and mix until uniform. Condition sample for pH and viscosity determinations. Base: Combine phase A in the main vessel. Start mixing and slowly add phase B. Mix for 30 minutes, then heat to 75°C. In a separate vessel, combine phase C. Heat to 75°C, then add phase D. When CD is homogeneous, add phase E and mix well. When AB and CDE are homogeneous and at 75°C, slowly add oil phase CDE to the water phase AB with prop mixing. After 5 minutes, start cooling with mixing until batch is at 30°C. Add water to correct for evaporative loss. Mix batch until uniform. Condition sample prior to pH and viscosity measurements. Instructions for Use: Wear impenetrable gloves. Combine equal amounts of Activator and Base in a plastic bowl. Mix with a wooden spoon until the blend is completely homogeneous. Perform allergy and strand tests and do not scratch scalp before using. | |
Properties | |
(25°C): Activator: Appearance—Translucent white cream; Viscosity (20 rpm, Brk, RV, T-D, after 48h; mPa∙s)— 6000–10000; pH—10.9–11.3 Base: Appearance—Opaque white cream; Viscosity (20 rpm, Brk, RV, T-D, after 24h at room temperature, mPa∙s)—35000 – 59000; pH—11.7 - 12.1 | |
More Information | |
The HallStar Company, 877-427-4255 (312-385-4494) Email: customerservice@hallstar.com • Website: hallstar.com |