Phase A | |
Deionized Water | q.s. |
LaraCare A200 (Galactoarabinan) (Lonza Consumer Care) | 2.00 |
Butylene Glycol | 1.50 |
Geogard LSA (Butylene Glycol (and) Benzyl Alcohol (and) Sorbic Acid (and) Caprylic/Capric Triglyceride (and) Lauryl Alcohol (and) Myristyl Alcohol) (Lonza Consumer Care) | 1.00 |
Carbopol Ultrez 21 (Acrylates/C10-30 Alkyl Acrylate Crosspolymer) (Lubrizol) | 0.25 |
Carbopol 2050 Polymer (Carbomer) (Lubrizol) | 0.15 |
Phase B | |
Gel Base BSM5 (Cyclomethicone (and) Dimethicone (and) Phenyl Trimethicone) (Lonza Consumer Care) | 3.00 |
Gel Base Sil (Cyclomethicone (and) Dimethicone) (Lonza Consumer Care) | 1.00 |
Cetiol CC (Dicaprylyl Carbonate) (BASF) | 3.00 |
Natrulon H-6 (Polyglycerin-6) (Lonza Consumer Care) | 0.50 |
Natrulon H-10 (Polyglycerin-10) (Lonza Consumer Care) | 0.50 |
TEA, 99% (Triethanolamine) | 0.30 |
Phase C | |
Deionized Water | 5.00 |
Niacinamide USP (Niacinamide) (Lonza Consumer Care) | 0.50 |
Carnipure Crystaline (Carnitine) (Lonza Consumer Care) | 1.00 |
Phase D | |
SD Alcohol 40-B (SD Alcohol 40-B) (Grains Processing) | 2.50 |
Rapithix A-60 (Trideceth-6) (Ashland) | 1.25 |
Moisture Blast Fragrance 062760 (Fragrance) (Chemia Fragrance & Flavor) | 0.20 |
Glycosperse L-20 KFG (Polysorbate 20) (Lonza Consumer Care) | 0.40 |
Procedure | |
1. Charge water of Phase A into main vessel. Add LaraCare® A200 active of Phase A to the main vessel and begin mixing. 2. Add remaining ingredients of Phase A to main vessel in order listed, mixing well between each ingredient addition. Mix until homogenous. 3. Add ingredients of Phase B to main vessel in order listed, mixing well between each ingredient addition. Mix until homogeneous. 4. Pre-mix ingredients of Phase C in a separate vessel. Mix until a clear solution forms. 5. Add Phase C to the main vessel. Mix until homogeneous. 6. Add Rapithix A-60 of Phase D to the main vessel. Mix until homoge- neous. 7. Slowly add alcohol of Phase D to the main vessel. Mix until homog- enous. 8. Pre-mix Glycosperse L-20 solubilizer and fragrance of Phase D in a separate vessel. Add to the main vessel. Mix until homogeneous. | |
Properties | |
pH: 5.0–6.0 • Viscosity: 20,000 – 25,000cps Spindle #5 @ 10rpm (25°C after 24 hours) • Appearance: White lotion |