Formulary

June 2007 forumlary:

Sprayable Hair Milk Soft and Pure Baby Wash Biorepair Skin Gel Skin Cushion with Lipex Sheasoft

Clear Face Wash Baby Balm FUN-ky Wet Fibers Mild Amide Free Baby Shampoo

Sprayable Hair Milk

Phase A

Water

96.30

Lactic Acid

0.40

Phase B

TEGO Amid S 18 (Stearamidopropyl dimethylamine)

1.20

Phase C

Tegin G 1100 Pellets (Glycol distearate)

0.60

Tego Care PS (Methyl glucose sesquistearate)

1.20

Tegosoft DEC (Diethylhexyl carbonate)

0.30

Preservative, perfume

q.s.

Procedure:
Heat Phase A up to 75°C. Stir Phase B into Phase A homogenously, add Phase C and homogenize. Add fragrance below 45°C.Heat Phase A up to 75°C. Stir Phase B into Phase A homogenously, add Phase C and homogenize. Add fragrance below 45°C.

Description:
Light leave-in hair conditioning spray with low viscosity and milky appearance (white and dense).

More Info:
Goldschmidt GmbH Goldscmidtstrasse 100, D-45127 Essen, Germany
Tel: 49 (201) 173-2854; Fax: 49 (201) 173 1828
E-mail: personal-care@degussa.com; Website: www.degussa-personal-care.com

Soft and Pure Baby Wash

Phase A

Plantapon SF (Sodium cocoamphoacetate, glycerin, lauryl glucoside, sodium cocoyl glutamate, sodium lauryl glucose carboxylate)

40.00

Water

58.50

Phase B

Sodium benzoate

0.50

Citric Acid 50%

q.s.

Phase C

Lamesoft PO 65 (Coco glucoside, glyceryl oleate)

1.00

Procedure:
Mix Phase A until homogenous. Add Phase B. Adjust pH value. Adjust viscosity with Phase C. Amount needed can vary.

Appearance:
Clear, slightly yellow.

More Info:
Cognis Corp., Care Chemicals Division, 300 Brookside Ave, Ambler, PA 19002
Tel: (800) 531-0815; Fax: (215) 628-1450; Website: www.cognis.com

Biorepair Skin Gel

Phase A

Deionized water

70.40

Glycerin

5.00

Hamamelis extract (Dragoco) (Hamamelis virginian- witch hazel)

5.00

D-Panthenol 50P (BASF) (Panthenol, propylene glycol)

1.00

Phenonip (Nipa Laboratories)

0.30

Carbopol 1342 (B.F. Goodrich/Noveon) (Acrylates/C10-30 alkyl acrylate crosspolymer)

0.60

Natrosol hydroxyethylcellulose 250 HR (Hercules) (Hydroxyethylcellulose)

0.30

Luviskol K90 (BASF) (PVP)

0.10

Phase B

Sodium hydroxide 18% solution

2.70

Phase C

Isopropyl myristate

3.00

Bisabolol

0.50

Antarox CO 530 (ISP) (Nonoxynol-6)

2.00

Phase D

Fitobroside (Pentapharm) (Triticum vulgare (wheat) germ extract)

3.00

Immucell (Pentapharm) (Glycoproteins)

3.00

Hyasol-BT (Pentapharm) (Sodium hyaluronate)

3.00

Fragrance (Givaudan) (PCV 1677)

0.10

Procedure:
Dissolve glycerin, hamamelis extract, D-panthenol 50P, Phenonip, Carbopol 1342, Natrosol Hydroxyethylcellulose 250 HR and Luviskol K90 in deionized water. Neutralize with Phase B. Mix Phase C and incorporate in the resulting gel. A white gel is obtained. Finally add Fitobroside, Immucell, Hyasol-BT and fragrance one after the other.

More Info:
Centerchem Inc., 20 Glover Ave., Norwalk, CT 06850
Tel: (203) 822-9800 Fax: (203) 822-9820
E-mail: cosmetics@centerchem.com; Website: www.centerchem.com

Skin Cushion with Lipex Sheasoft

Phase A

Lipex Sheasoft (Butyrospermum parkii)

13.00

Arlamol E (PPG-15 Stearyl Ether)

5.00

Lipex L'sens (Soybean glycerides (and) butyrospermum parkii)

3.00

Akoline GC (Hydrogenated vegetable glycerides citrate)

2.50

Akorex L (Canola oil)

2.00

Akoline MD50 (Glyceryl stearate)

1.00

Baysilone SF 1202 (Cyclomethicone)

2.00

Nafol 1618 (Cetearyl alcohol)

3.00

Akoline SL (Sodium stearoyl lactylate)

0.26

Phase B

Water

q.s. to 100

Atlas G-2330 (Sorbeth-30)

3.00

Phase C

Simulgel NS (Hydroxyethyl acrylate (and) sodium acrylodimethyltaurate copolymer (and) squalane and polysorbate 60)

1.00

Phase D

Preservative, perfume

q.s.

NaOH 20%

q.s to pH 6.50

Procedure:
Heat oily phase and water phase up to 75°C separately. Merge phases, homogenize. At 65°C add well mixed Simulgel, mix thoroughly. Add preservative and perfume, followed by homogenizing shortly at 30°C. Adjust pH with sodium hydroxide.

More Info:
AAK Aarhuskarlshamn Sweden, AB
Tel: +(46) 454-820 00; Fax: +(46) 454-828 85 E-mail: info@aak.com

Clear Face Wash

Phase A

Water

q.s. to 100

Propylene glycol

2.00

BioTerge AS-40 CG-P (Sodium C14-16 olefin sulfonate)

26.00

Stepan-Mild L3 (Lauryl lactyl lactate)

2.00

Phase B

Salicylic Acid

2.00

Phase C

Stepan PEG 6000 DS (PEG-150 Distearate)

1.50

Phase D

Sodium hydroxide 50% solution

q.s.

Sodium chloride

q.s.

Phase E

Preservative, dye and fragrance

q.s.

Procedure:
In a vessel equipped with heating and agitation capabilities, charge water, propylene glycol and Bio-terge AS-40 CG-P. Start heating to 45-50°C with mixing. Add Stepan-mild L3 with agitation. Continue heating to 45-50°C. Mix until completely clear. Add salicylic acid with agitation. Mix until completely clear and everything is dissolved, while maintaining temeprature at 45-50°C. Add Stepan PEG 6000 DS with agitation. Mix until completely clear and everything is dissolved, while maintaining temperature at 45-50°C. Begin cooling to room temperature with agitation. Adjust pH with sodium hydroxide. Adjust viscosity with sodium chloride. Add preservatives, dye and fragrance if needed.

More Info:
Stepan Company, 22 W. Frontage Rd., Northfield, IL 60093
Tel: (847) 446-7500; Fax: (847) 501-2443 Website: www.stepan.com

Baby Balm

1. Distilled water

70.00

2. Viscolam AT 100/P (Sodium polyactyloyldimethyl taurate, hydrogenated polydecene, trideceth-10)

4.00

3. Glycerin USP (Glycerin)

2.00

4. Shebu refined (Butyrospermum parkii (shea butter))

5.00

5. RITA Cocoa Butter (Theobroma cacao (cocoa) seed butter)

5.00

6. RITA Cetearyl Alcohol 50/50 (Cetearyl alcohol)

2.00

7. Natural Beeswax (Theobroma cacao (cocoa) seed butter)

2.00

8. Pationic ISL (Sodium isostearoyl lactylate)

1.00

9. Ritapan DL (Panthenol)

1.00

10. Gblock DZ 104 (Zinc oxide, caprylic/capric triglyceride, ethylhexyl palmitate, lecithin, polyglycerol-3 polyricinoleate, triethoxycaprylylane)

7.00

11. Preservative

1.00

Procedure:
Combine items 1 and 2, mix until uniform. Add 3, mix. Heat to 65°C. Combine 4-8, heat to 65°C, mix until all melted, add to the batch, mix. Cool add 9 , 10 and 11, mix well.

More Info:
RITA Corporation P.O. Box 457, Crystal Lake, IL 60039
Tel: (815) 337-2500; Fax: (815) 337-2522

FUN-ky Wet Fibers

Phase A

Deionized Water

46.53

Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Carbopol®* Ultrez 21 Polymer

0.30

Aminomethyl Propanol, AMP-Ultra™ PC 2000 (95%)

0.03

Phase B

Polyacrylate-2 Crosspolymer (30%), Fixate™* Superhold Polymer

15.68

Diisostearyl Fumarate, Schercemol™* DISF Ester

1.00

Alcohol Denat., Ethanol

3.00

DMDM Hydantoin (and) Iodopropynyl Butylcarbamate, Glydant Plus® Liquid

0.40

Aminomethyl Propanol, AMP-Ultra™ PC 2000 (95%)

2.06 (q.s to pH 6.8 - 7.2)

Phase C

Propylene Glycol

5.00

PEG-90M, Rita PEO-18 (or) Polyox WSR-301

0.30

Deionized Water

20.00

Phase D

Yellow 6, F D & C Yellow No. 6 (0.1%)

3.50

Red 33, D & C Red No 33 (0.1%)

2.20

Procedure:

Sprinkle Carbopol®* Ultrez 21 Polymer on the surface of Deionized water and allow to wet. Begin gentle mixing.
Partially neutralize Carbopol®* Polymer dispersion with AMP-Ultra™ PC 2000. Mix until uniform.
Add PART B ingredients one at a time in order to the batch with mixing.
Adjust pH to 6.8 – 7.2 with AMP-Ultra™ PC 2000.
Prepare PART C: mix glycol and water. Add slowly PEG-90M to the mix with strong agitation and slight heating, until homogeneous.
Add PART C to the batch with mixing.
Add dyes. Mix until uniform.

Product Properties:
Appearance: Stringy red opaque gel
pH: 6.8 – 7.2
Viscosity (mPa·s)***: 25,000 – 40,000
High Humidity Curl Retention:
98% of original curl after 8 hours
98% of original curl after 24 hours
(90% relative humidity, 25˚C)

Stability: Passed 2 months @ 45°C, 5 cycles freeze/thaw (in process)

*** Brookfield RVT, spindle 6, 20 rpm, 25°C, measured after 24 hours

Supplier References:
Noveon, Inc. (2, 4, 5)
Dow / Angus (3, 8)
VWR (6, 9)
Lonza (7)
Rita (or) Dow / Amerchol(10)

More Info:
For more information visit www.noveon.com or www.carbopol.com or contact your nearest Noveon location.

North America
9911 Brecksville Road
Cleveland, OH 44141
Tel: 216.447.5000
Tel: 800.379.5389
Fax: 216.447.5250

Noveon de Mexico, S.A. de C.V.
Av. Interceptor Pte. #69
Cuautitlán Izcalli
54730 Edo. de Mexico, Mexico
Tel: 52.55.3067.0860
Fax: 52.55.5870.8957

Europe, Middle East and Africa
Chaussée de Wavre, 1945
B-1160
Brussels, Belgium
Tel: 32.2.678.19.11
Fax: 32.2.678.20.02

Asia-Pacific Ltd.
1107-1110 Shui On Centre
6-8 Harbour Road
Wanchai, Hong Kong
Tel: 852.2508.1021
Fax: 852.2512.2241

Mild Amide Free Baby Shampoo

Deionized Water

59.60

Polyquaternium-10, UCARE™ Polymer JR-400

0.10

Sodium Trideceth Sulfate (30%), Sulfochem™* TD-3 Surfactant

10.00

PEG-80 Sorbitan Laurate

8.00

Cocamidopropyl Betaine (35%), Chembetaine™* C Surfactant

11.50

Sodium Lauroamphoacetate (40%), Miranol® HMA

4.00

PEG-120 Methyl Glucose Trioleate (and) Propylene Glycol (and) Water, Glucamate™* LT Thickener

5.50

Tetrasodium EDTA, Versene™ 100

0.20

Citric Acid (50%)

0.70 (q.s. to pH 6.0)

DMDM Hydantoin (and) Iodopropynyl Butylcarbamate, Glydant Plus®

0.40

Procedure:

Add deionized water at 70°C to a suitable vessel.
Disperse polyquaternium-10 into batch. Mix until uniform, no lumps
Add remaining ingredients in order allowing each to completely mix before adding the next. Maintain temperature at 70°C after Glucamate™* LT Thickener is added for at least 30 minutes. (Note: lower temperatures will result in lower viscosity.)
Cool batch to ~40°C. Add the preservative.
Adjust pH to 6.2 with citric acid.

Product Properties:
Appearance: Clear Liquid
pH: 5.8 – 6.2
Viscosity (mPa·s)***: 3,500 – 5,500
Turbidity (NTU)****: 8 – 15
Stability: Passed 3 months @ 45°C, 5 cycles freeze / thaw

*** Brookfield DV-II @ 20 rpm, 25°C, #5 spindle, measured after 24 hours

**** HF Scientific, Inc. Micro 100 Turbidimeter

Supplier References:
Dow (2, 8)
Noveon, Inc. (3, 5, 7)
Rhodia (6)
Lonza (10)