Formulary

July 2007 forumlary:

Color Boosting Conditioning Shampoo Sprayable W/O Hair Shine Daily Wear Facial Moisturizer Fresh Foundation in Powder Form Funky Wet Fibers

Natural Moisturizing Shampoo Skin Extravagance Caviar Créme Smooth Antiperspirant Cream Conditioning 2-in-1 Shampoo

Color Boosting Conditioning Shampoo

Rewopol SB CS 50 K (Disodium PEG-5 laurylcitrate sulfosuccinate; sodium laureth sulfate)

8.25

Rewoteric AM C (Sodium cocoamphoacetate)

20.90

Abil Soft AF 100 (Methoxy PEG/PPG-7/3 aminopropyl dimethicone)

0.50

Jaguar C-162 (Rhodia) (Hydroxyporpyl guar hydroxypropyltrimonium chloride)

0.30

Water

64.85

Antil 200 (PEG-200 hydrogenated glyceryl palmate; PEG-7 glyceryl cocoate)

2.50

Rewopal PEG 6000 DS (PEG-150 distearate)

0.50

Basic red

q.s.\

Basic brown

q.s.

Basic yellow

q.s.

Citric acid (30% in water)

2.20

Preservative, perfume

q.s.

Procedure:
Dissolve the guar-quat in the water. Mix the ingredients in the given order. Before adding the Rewopal PEG 6000 DS, melt and dissolve it in a part of the water and heat it up to approximately 60-65°C.

More Info:
Goldschmidt GmbH Goldscmidtstrasse 100, D-45127 Essen, Germany
Tel: 49 (201) 173-2854; Fax: 49 (201) 173 1828
E-mail: personal-care@degussa.com; Website: www.degussa-personal-care.com

Sprayable W/O Hair Shine

Phase A

Deionized water

q.s. to 100

Stepanquat ML (Quaternium-82)

2.5

Stepan PEG 600 ML (PEG-12 Laurate)

0.5

Phase B

Dow Corning 345 Fluid (Cylcomethicone)

20.0

Ethylhexyl Isononanoate (Stepan octyl isononanoate)

2.0

Escalol 557 (ISP) (Ethylhexyl methoxycinnamate)

7.5

Escalol 587 (ISP) (Ethylhexyl salicylate)

5.0

Abil EM-90 (Goldschmidt) (Cetyl dimethicone copolyol)

1.5

Phase C

Preservative, dye, fragrance

q.s.

Procedure:
Mix together all ingredients in Phase A. In a separate container, mix together all ingredients in Phase B. Add Phase A to Phase B. Mix for 20-25 minutes until emulsified. Add Phase C ingredients. Homogenize for 3-5 minutes at 5000rpm.

More Info:
Stepan Company, 22 W. Frontage Rd., Northfield, IL 60093
Tel: (847) 446-7500; Fax: (847) 501-2443 Website: www.stepan.com

Daily Wear Facial Moisturizer

Phase A

Deionized water

81.95

Glycerin

3.00

Carbopol Ultrez (Noveon) (Carbomer)

0.30

Phase B

Crodafos CS-20 Acid (Croda) (Cetearyl alcohol (and) ceteth-20 phosphate (and) dicetyl phosphate)

2.00

Crodaderm B (Croda) (Sucrose polybehenate)

0.50

Crodaderm S (Croda) (Sucrose polysoyate)

1.25

Crodamol STS (Croda) (PPG-3 benzyl ether myristate)

5.00

Benzophenone-3 (Aldrich)

1.00

Propyl paraben

0.20

Methyl paraben

0.20

Phase C

TEA 98%

0.60

Phase D

Helioguard 365 (Croda) (Water (and) lecithin (and) alcohol (and) sodium lactate (and) porphyra umbili calis/porphyra umbilicalis extract (and) phenoxyethanol)

2.00

Phytessence Stevia (Croda) (Glycerin (and) water (and) stevia rebaudiana extract (and) potassium sorbate (and) methyl paraben (and) ethyl paraben)

2.00

Procedure:
Combine first two ingredients of Phase A in main vessel and heat to 75-80°C. Dust in remaining ingredient from Phase A. Combine Phase B ingredients and heat to 75-80°C. Add Phase B to Phase A, after all the carbomer has been hydrated, with mixing. Add Phase C. Cool to room temperature. Add Phase D. Adjust pH, if necessary.

More Info:
Croda Inc., 300-A Columbus Circle, Edison, NJ 08837
Tel: (732) 417-0800; Fax: (732) 417-0804; Website: www.crodausa.com

Fresh Foundation in Powder Form

Phase A

Covagel (LCW) (Sodium carboxymethyl starch)

3.80

Mica 8 AS R0433 (LCW) (Mica (and) triehtoxycaprylylsilane)

2.40

Talc AS R0435 (LCW) (Talc (and) triethoxycaprylylsilane)

6.00

Covabead PMMA 2MUSI, (LCW) (Methylmethacrylate crosspolymer (and) silica)

2.40

Phase B

PW Covasil S1 (LCW) (Titanium dioxide (and) trimethoxycaprylylsilane)

3.10

Unipure Red LC 381 AS-EM (LCW) (CI 77491 (and) triethoxycaprylylsilane)

0.38

Unipure Yellow LC 182 AS-EM (LCW) (CI 77492 (and) triethoxycaprylylsilane)

1.10

Unipure Black LC 989 AS-EM (LCW) (CI 77899 (and) triethoxycaprylylsilane)

0.20

Unipure White LC 981 AS-EM (LCW) (CI 77891 (and) triethoxycaprylylsilane)

6.25

Phase C

Pure water

71.57

Preservatives

0.30

Fucosorb (LCW) (Algae (and) sorbitol)

2.00

Glycerin

0.50

Triethanolamine (99%)

adjust to pH=8

Procedure:
Mix powders of Phase B with a blender for powders (in a lab, use a coffee mill). Mix powders of Phase A with Phase B with a blender for powders (in a lab use a baby chef). Prepare Phase C and pour Phase C in Phase A & B under mechanical stirring and stir until obtaining a fine powder.

More Info:
Sensient Cosmetic Technologies 7-9 Rue de l’Industrie Saint Ouen l’Aumône, France 95310
Tel: 33 01 34 48 57 00; Fax: 33 01 34 64 44 40

Funky Wet Fibers

Phase A

Deionized water

46.53

Carbopol Ultrez 21 Polymer (Acrylates/C10-30 alkyl acrylate crosspolymer)

0.30

AMP-Ultra PC 2000 (95%) (Aminomethyl propanol)

0.03

Phase B

Fixate Superhold Polymer (Polyacrylate-2 crosspolymer 30%)

15.68

Schercemol DISF Ester (Diisostearyl fumarate)

1.00

Ethanol (Alcohol Denat.)

3.00

Glydant Plus Liquid (DMDM Hydantoin (and) Iodopropynyl butylcarbamate)

0.40

AMP-Ultra PC 2000 (95%) (Aminomethyl propanol)

2.06

Phase C

Propylene glycol

5.00

RITA PEO-18 (or) Polyox WSR-301 (PEG-90M)

0.30

Deionized water

20.00

Phase D

F D & C Yellow No. 6

3.50

D & C Red No. 33

2.20

Procedure:
Sprinkle Carbopol Ultrez 21 polymer on the surface of deionized water and allow to wet. Begin gentle mixing. Partially neutralize Carbopol polymer dispersion with AMP-Ultra PC 2000. Mix until uniform. Add Phase B ingredients one at a time in order to the batch with mixing. Adjust pH to 6.8—7.2 with AMP-Ultra PC 2000. Prepare phase C: mix glycol and water. Add slowly PEG-90M to the mix with strong agitation and slight heating, until homogenous. Add phase C to the batch with mixing. Add dyes. Mix until uniform.

More Info:
Noveon Personal Care 9911 Brecksville Road, Cleveland, OH 44141
Tel: (216) 447-5000; Fax: (216) 447-5250 Website: www.noveon.com

Natural Moisturizing Shampoo

Farmal HFS 2656 (Hydrolyzed corn starch)

12.0

Ammonium lauryl sulfate (30%)

40.0

Lauramidopropyl Betaine (30%)

5.0

Isostearamidopropyl morpholine lactate (25%)

4.5

Water, preservative, dye, fragrance

q.s.

Procedure:
Add first four components to water. Heat to 40°C and blend until clear. Add fragrance, dye and preservatives. If needed, adjust pH to 5.0-6.0 with dilute sodium hydroxide.

Appearance:
Product is a viscous clear shampoo. It provides excellent foam, mild conditioning and moisturizing properties.

More Info:
Corn Products International, Inc. 5 Westbrook Corporate Center Westchester, IL 60154
Tel: 800-443-2746; Fax: (216) 447-5250 Website: www.farmalingredients.com

Skin Extravagance Caviar Créme

Phase A

Emulgade SE-PF (Glyceryl stearate (and) ceteareth-20 (and) ceteareth-12 (and) cetearyl alcohol (and) cetyl palmitate)

5.00

Lanette 22 (Behenyl alcohol)

2.00

Cegesoft C24 (Ethylhexyl palmitate)

4.00

Cetiol PGL (Hexyldecanol (and) hexyldecyl laurate)

4.00

Fitoderm (Squalane)

3.00

DC 200-350 (Dimethicone)

1.00

Cosmedia SP (Sodium polyacrylate)

1.00

Phase B

Deionized water

q.s. to 100.00

Plantapon ACG 35 (Disodium cocoyl glutamate)

0.80

Elestab 50J (Chlorphenesin (and) methylparaben)

0.40

Glycerine

4.00

Phase C

Compexe caviar LS 9747 (Laboratoires Serobiologiques)

3.00

Phase D

Perfume Champaline G10415611 (Fragrance)

0.05

Citric acid 10%

q.s.

Procedure:
Heat Phases A and B at 75°C. Add Phase B into A while mixing under low turbine stirring until 60°C. Add Phase C until homogenous. Allow to cool to room temperature under gentle mixing, add Phase D at 30°C. Adjust pH value with citric acid.

More Info:
Laboratoires Sérobiologiques 300 Brookside Ave., Ambler, PA 19002
Tel: (800) 531-0815; Fax: (215) 628-1450; Website: www.cognis.com

Smooth Antiperspirant Cream

Phase A

Deionized water

q.s.

Structure XL Starch (National Starch) (Hydroxypropyl starch phosphate)

4.00

Aluminum chlorohydrate

20.00

Phase B

Cetiol OE (Cognis) (Dicraprylyl ether)

3.00

Cetiol LC (Cognis) (Coco/caprylate/caprate)

2.50

Pricerine 9091 (Uniqema) (Glycerin)

2.00

Eutanol G (Cognis) (Octyldodecanol)

0.50

Eumulgin B1 (Cognis) (Ceteareth-12)

1.00

Eumulgin B2 (Cognis) (Ceteareth-20)

1.00

Crodacol CS90EP (Croda) (Cetearyl alcohol)

0.50

Estol 1474 (Uniqema) (Glyceryl stearate)

1.00

Estol 3614 (Uniqema) (Glyceryl laurate)

1.00

Estol 3694 (Uniqema) (Cetyl palmitate)

0.50

Phase C

Avocado Seed Oil (Jan Decker) (Persea gratissima)

0.30

Perfume

0.20

Procedure:
Premix Structure XL starch in water, let it stir until the solution is homogenous. Add the aluminum chlorohydrate to Phase A, heat the mixture up to 65°C. Premix Phase B and heat up to 65°C. Add Phase B to Phase A and let it stir while it’s cooling to 30°C. Add Phase C, cool to room temperature.

More Info:
National Starch Bridgewater, NJ Tel: 888-331-6212 Fax: 908-707-3664
Email: personalcare.usa@nstarch.com

Conditioning 2-in-1 Shampoo

Phase A

Deionized water

36.13

Acrylates Copolymer (30%), Carbopol Aqua SF-1 Polymer

5.00

Sodium Laureth Sulfate (3 Mole, 28%), Sulfochem ES-3 Surfactant

30.00

Sodium Hydroxide (18%)

~ 0.90 (q.s. to pH 6.5)

Phase B

Cocamidopropyl Hydroxysultaine (50%), Chembetaine CAS Surfactant

10.00

Disodium Laureth Sulfoccinate (40%), Chemccinate DSLS Surfactant

10.00

Phase C

Deionized water

3.00

Mica (and) Titanium Dioxide, Timiron Starluster MP 115

0.20

Phase D

Dimethicone (60,000 cSt), Dow Corning 200 Fluid

3.00

Phenoxyethanol, Methyl-, Ethyl-, Propyl-, Butyl-, and Isobutylparaben, Phenonip

0.50

Fragrance, Rain Fresh # J6746

0.50

Yellow 10 (0.1%)

0.07

Blue 1 (0.1%)

0.30

Citric Acid (50%)

~0.40 (q.s. to pH 5.5)

Procedure:
1.   Combine PART A: Add Carbopol®* Aqua SF-1 Polymer to deionized water. Add Sulfochem™* ES-3 Surfactant with gentle mixing.
2.   Neutralize to pH 6.5 with sodium hydroxide.
3.   Add PART B ingredients to the batch in order, while mixing.
4.   Premix PART C ingredients, and add to batch. Mix until uniform.
5.   Add PART D ingredients to batch in order listed. Mix until uniform.
6.   Adjust pH to 5.5 with citric acid.

Properties:
Appearance: Satiny, pearlized viscous liquid
pH: 5.3 – 5.7
Viscosity, (mPa·s)****: 4,000 – 7,000
Yield Value (dyn/cm²): 100 – 150
Stability: Passed 3 months @ 45°C, 5 cycles freeze/thaw

Carbopol®* Aqua SF-1 Polymer Actives, 1.5%

Surfactant Actives, 17.4%

**** Brookfield RVT @ 20 rpm, 25°C, #5 spindle, measured after 24 hours

More Info:
Lubrizol
North America
9911 Brecksville Road
Cleveland, OH 44141-3247
TEL: 216.447.5000
TEL: 800.379.5389
FAX: 216.447.5250

For more information visit www.personalcare.noveon.com or contact your nearest Lubrizol Advanced Materials location