Anti-Aging Multifruit Lotion

Phase A

Phase B

Phase C

Phase D

Phase E

Procedure::
Slowly add Veegum Ultra to the water and mix for 15 minutes using homogenizer at 5500 rpm. Blend ingredients of phase B and sift to phase A while mixing. Heat phase A/B up to 80°C and mix for 25-30 minutes. Add methylparaben. Combine phase C together and heat to 80°C. Add phase C to A/B. Premix phase D and add at 40°C into batch, then add phase E.

pH: 3.8-4.0
Viscosity: 18,400- 27, 600 cps
(Brookfield, E-spindle, 10 rpm)

MORE INFO

National Starch Personal Care, Bridgewater, NJ
Tel: (888) 331-6212, Fax: (908) 707-3664, Website: www.personalcarepolymers.com

Wet Wipe Emulsion-Wood, Leather, Plastic

Procedure::
Add TEGO Polish Addivit WE 50 into the mixing vessel. Blend in all ingredients in the given order with continuos stirring.

MORE INFO:

Evonik Goldschmidt Personal Care (formerly Degussa) 710 S. 6th Ave. Hopewell, VA 23860
Tel:(804) 541-8658, Fax: (804) 541-8689
E-mail: info-household-care@evonik.com; Website: www.evonik-household-care.com

Water-in-Oil Self-Tanning Gel

Phase A

Phase B

Procedure::
Combine phase A cyclomethicone and Jeesilc PS-CM. Homogenize at a slow speed until uniform. Add in the Abil EM-97 and fragrance and mix well. Combine the water and DHA of phase B and mix well until dissovled. Warm if necessay to dissolve all the DHA. Add in all other ingredients and mix until uniform. Adjust pH with citric acid. When phases are at room temperature, begin medium speed homogenizing agitation in phase A and very slowly add phase B. Viscosity will increase and sweep mixing necessary. Once uniform, cool batch to RT.

MORE INFO:

Jeen International Corporation, 24 Madison Rd., Fairfield, NJ 07004
Tel: (800) 771-5336, Fax: (973) 439-1402 E-mail: info@jeen.com Website: www.jeen.com

Delicious 24-hour Soft Touch

Phase A

Phase B

Phase C

Phase D

PROCEDURE::
Heat phase A to 80°C and stir until uniform. Heat phase B to 80°C and add to phase A while stirring. Add phase C just after emulsification. Allow the emulsion to cool while stirring in such a way that it remains in continual motion. Avoid incorporation of air.

MORE INFO:

Cognis Corp. Care Chemicals Division, 300 Brookside Ave, Ambler, PA 19002
Tel: (800) 531-0815, Fax: (215) 628-1450, Website:  www.cognis.com

24 Hour Moisturizing Body Wash

Phase A

Phase B

Phase Additional Ingredients

Procedure::
Charge water into main vessel to prepare phase A. Add Versene 100E slowly sift in Jaguar C17 and mix until uniform. Charge Miracare SLB-365/MP and mix until uniform. To prepare phase B blend the rapeseed oil and Ionol CP until uniform. Add phase B to phase A and stir until uniform. Charge sodium chloride (solid or solution) to A+B into main vessel and mix until uniform. Adjust pH of the system to 5.0-5.5 with citric acid solution (50% aq.), add the fragrance and mix for one hour. Exfoliating beads, mica, etc. can be added as desired. The use of paddle stirrers, impellers or anchors is recommended. Preparation can be done at room temperature.

More Info:

Rhodia, 8 Cedar Brook Drive, Cranbury, NJ 08512 Tel: (609) 860-4000, Fax: (609) 409-8652
E-mail: rhodiac@us.rhodia.com Website: www.rhodia-hpcii.com

White Clay Hydrating Facial Mask

Phase A

Phase B

Phase C

Phase D

Phase E

Phase F

PROCEDURE::
Combine all ingredients in phase A and heat to 70°C. Mix until uniform. Combine all ingredients in phase B in a separate vessel and heat to 70°C. Mix until uniform. Slowly add phase B to phase A using moderate agitation. Mix until uniform. In a dry vessel, mix Kaolin and titanium dioxide together. Slowly sieve phase C into the batch. Mix batch thoroughly until homogeneous. Allow batch to cool. Pre-mix phase D ingredients in a separate vessel. When batch has cooled to at least 55°C, add phase D to batch, mix until uniform. Adjust pH to 4.5-5.5 with glycolic acid. Mix until uniform. Continue cooling batch. When batch has cooled to 45°C, slowly add phase F ingredients to batch one at a time with mixing. Mix until uniform. Continue slow mixing until batch has cooled to 40°C.

MORE INFO:

Noveon 9911 Brecksville Rd., Cleveland, OH 44141-3247
Tel: (800)379-5389; Fax: (216) 447-5250 Website:  www.personalcare.noveon.com

Stress Relief Calming Body Cream

Phase A

Phase B

Phase C

Phase D

Phase E

Procedure::
Disperse Carbopol Ultrez 10 and Pemulen TR-1 Polymers using vigorous mixing. Add glycerin to  A with mixing.  Mix until uniform. Add Coco-Glucoside to batch. Mix until uniform.  Heat main batch to 70°C. In a separate vessel, pre-mix C ingredients and heat to 70°C. Add C to main batch.  Mix until uniform. Neutralize batch with sodium hydroxide (18%).  Mix until uniform.  Begin cooling batch.  Mix batch until temperature reaches 30-35°C.  Add PART E ingredients one at a time in order to batch. Mix well after each addition.  Mix until uniform. 

Product Properties:

Appearance: Creamy emulsion
pH:       5.3 – 5.7
Viscosity (mPa·s)***    20,000 – 25,000
Stability:  Passed 3 months @45°C, 1 month @ 55°C,                                  3 cycles freeze/thaw

More info:

Lubrizol Advanced Materials, Inc. (Noveon®* Consumer Specialties), 9911 Brecksville Road
Cleveland, OH 44141-3247. Tel: 216.447.5000, 800.379.5389. Fax: 216.447.5250. Website:  www.personalcare.noveon.com

Archived Formulary

Buyer's Guide

Search the 2008 Buyer's Guide for a company:

Search the 2008 Buyer's Guide for a category:

Absorption Base Alcohol, Ethyl Alcohol, Fatty Alcohol, Stearyl Alkanolamides Allantoin Aloe Vera Alpha Hydroxy Acids Alpha Olefins, Normal Aluminum Compounds Amides Amine Oxides Amino Acids Ammonium Compounds Amphoterics Anti-caking Agents Antimicrobials Antioxidants Antiperspirants Antistatic Agents Aroma Chemicals Aromatic Extracts Bactericides Benzene Betaines Bittering Agents Black Acetylene Bleaching Agents Boron Nitride Botanicals Bromides Capsules Carbon, Activated Carboxymethylcellulose Carrageenan Castor Oil Caustic Soda Ceramides Chelating & Sequestering Agents Chitin Cholesterol Citrates Collagen Colors Computer Software Cyclodextrins D-Limonene Defoamers Deodorants Detergent Alcohols Detergent Intermediates Detergents, Alkali Detergents, Amphoterics Detergents, Anionic Detergents, Cationic Detergents, Nonionic DHA Diethylphthalate Disinfectants Dispersing Agents Enzymes Essential Oils Esters Ethanolamines Ethoxylates Fatty Acids Filaments Fluorescent Whitening Agents Foam Stabilizers Foaming Agents Fragrance Encapsulation Fragrance Raw Materials Fragrances Fungicide Glycerine Glycolic Acid Glycols Gum Hair Conditioners Henna Hexachlorophene Humectants Hyaluronic Acid Hydrides Hydrogen Peroxide Hydrogenated PAOs Hydrotropes Imidurea In Vitro Test Methods Insect Repellents Insecticides Iodophor Compounds Iron Oxides Isopropyl Fatty Esters Isopropyl Myristate Isopropyl Palmitate Jojoba Lactic Acid Lanolin Lauryl Sulfate Lecithin Liposomes Liquid Crystals Lutein Macroencapsulation Magnesium Sulfate Marine Oils Mica Microencapsulation Microspheres Mineral Oil Mink Oil Moisturizers Molecular Sieves Musk Nail Enamel Nail Enamel Resins NTA Oat Extracts Oleic Acid Opacifying Agents Oral Care Additives Palm Oil Panthenol Paraffin Pearlescent Pigments Petrolatum Phosphates Phospholipids Phosphoric Acid Poly Alpha Olefins Polybutene Polydecene, PAOs Polyethylene Glycols Polymers Potassium Compounds Powder Bases Preservatives Propylene Glycol Protein Puffed Borax PVPs Quats Reducing Agents Resins Seaweed Extracts Silicates Silicones Skin Assessment Products Soda Ash Sodium Bicarbonate Sodium Chloride Sodium Hyaluronate Sodium Metasilicate Sodium Perborate Sodium Percarbonate Sodium Sulfate Solubilizers Solvents Sorbitol Squalene Starch Stearates Sulfonates Sulfosuccinates Sunscreens Surfactants & Emulsifiers Suspending Agents Talc Tall Oil Fatty Acids Tallow Tan Accelerators Tea Tree Oil Test Skin Thickening Agents Thioglycolic Acid Titanium Dioxide Topic Microspheres Vegetable Oil Vegetable Proteins Vitamins Water Soluble Polymers Water Treatment Chemicals Waxes & Polymers White Oils Zeolites Zinc Lactate Zinc Oxide Zinc Pyridinethione Aerosol Can Disposal Aerosol Packaging Machinery Agitators Aluminum Coil Antimicrobial Testing Equipment Applicators Assembly Bag in Box Packaging Barrier Packs Blowmolding Equipment Bottles, General Bottles, Perfume Bows/Ribbons Boxes Brushes Cappers Caps Carton Machines Cartons Case Trays Centrifuges Child-Resistant Closures Coders Colorants for Plastic Compacts Computer Control Containers, Aluminum Containers, Composite Containers, Glass Containers, Plastic Containers, Specialty Metal Containers, Tin Plate Converting Machines Conveyors Cosmetic Patch Film Cosmetic Samplers Custom Decorating Cutting & Folding Machines Decorating Equipment Detergent-Making Machinery Dip Tubes Discs Dispensers Droppers Emulsifying Equipment Filling Machines Filters Fluid Surface Tension Instruments Form, Fill & Seal Machines Fragrance Samplers Fragrance Sampling Heating Elements Homogenizers Hot-Filling Equipment Hot-Melt Equipment Intermediate Bulk Containers Jars Kettles Lab Equipment Labeling Machines Labels Liners Lipstick Containers Lipstick Molding Machines Machinery, Used Metal & Plastic Specialty Stamping Metallizers Metered Pumps Metered Valves Meters Milling & Grinding Equipment Mixing Machinery Nonwoven Fabric Overcaps Palletizers Paperboard Perfume Stoppers POP Displays Pouches Powder Boxes Powder Presses Propellants Pumps, Sprayers Purfication Equipment Recovery Filters Refurbishing Shrink Packaging Sleeve Labels Soap-Making Equipment Sponges Stick Packaging Surplus Components Tamper-Evident Packaging Tanks Testing Equipment Tube Fillers Tubes Tubs Unit Packaging Unscramblers Valves, Aerosols Vats Vials Wrapping Equipment Insurance ISO Certification Professional Services Testing Services

Search the 2008 Buyer's Guide for a term:

This will search both companies and categories