Fresh Start Eye Treatment from Noveon

Phase Phase A

Phase Phase B

Phase Phase

Phase Phase D

Phase Phase E

Procedure::
Phase A: Sprinkle Carbopol Ultrez 10 Polymer on the surface of deionized water. Once polymer has wetted, begin gentle agitation. Add ingredients 3-6 to phase A in order with mixing. Mix until uniform. Heat to about 65-70°C. Phase B: In a separate mixing vessel, add Phase B ingredients. Heat to about 65-70°C and mix until uniform. When phase A and B are at 65-70°C, add phase B to phase A with mixing. Mix until uniform. While batch is still hot (65-70°C), add sodium hydroxide with mixing. Mix batch for 10-15 minutes or until uniform. Begin cooling batch to below 40°C. When batch has cooled to <40°C, add phase D ingredients in the order to batch with mixing. Mix until uniform. Add phase E ingredients one at a time to main batch. Mix until uniform.

Product Properties:
Appearance:    Off white lotion
pH:    6.90-7.05
Viscosity (mPas)**    13,000-17,000
Stability:     Passed 6 weeks @ 50°C,
        5 cycles freeze/thaw

** Brookfield RVT @ 20rpm, 25°C, #6 spindle, measured after 24 hours.

Comments::
The appearance of fine lines, wrinkles, sagging and age spots are all targets of this eye treatment based on tomatoes, lemons and hibiscus flowers. This formulation features an initial refreshing skinfeel suitable for delicate areas that evolves into a rich, substantive afterfeel with targeted delivery. Carbopol Ultrez 10 polymer stabilizes the emulsion and provides the light, fresh texture during initial application, while the combination of Schercemol DISM and DISD Ester provide the cushiony, persistent afterfeel and contribute to anti-migration properties.

More info::
Noveon Consumer Specialties
9911 Brecksville Road Cleveland, OH 44141-3247,  Tel: 216-447-5000, 800-379-5389
Fax: 216-447-5250,  Website: www.personalcare.noveon.com

Green Fluid Day Cream 7065B

Phase Phase A

Phase Phase B

Procedure::
Weigh phase A ingredients in a vessel and heat to 85°C. Weigh the water in a separate vessel and heat to 80°C. Sprinkle the xanthan gum into the water while stirring with a stirrer equipped with a serrated disk head. Prepare phase C by solubilizing Lipacide C8G in hot water (80°C) with sodium hydroxide. When the gel is homogeneous, add phase C into phase B and mix well. Then add phase (B+C) into phase A and homogenize with a rotor stator at 4000rpm for 4 minutes. When the cream is smooth, start cooling down and mix gently. At 40°C, add the remaining ingredients and mix well.

Characteristics::
Appearance: White fluid emulsion
pH: 5.3
Viscosity after 1 month at RT:
    12,200 mPa.s Brookfield  LV3 v 6 rpm
Stability : > 1 month at RT and 45°C

Evaluation::
This formula passed the challenge test performed according to the French Standard European Pharmacopea. Developed in accordance with Ecocert Standard. Only 1% of Lipacide C8G combined with 0.30% of sorbic acid was enough to provide a good anti-microbial efficacy to the formula.

More info::
Seppic Inc.,  Two Bridges Road, Suite 210, Fairfield, NJ 07004-1530
Tel.: (973) 882-5597, Fax: (973) 882-5178,  Website: www.seppic.com

Warming Lip Gloss

Phase Phase A

Phase Phase B

Procedure::
Mix phase A at room temperature. Mix phase B ingredients and heat to 65°C. Mix until clear and uniform. Add phase B to phase A with moderate speed mixing. Pour into suitable  containers.

Specifications::
pH:    NA
Viscosity:    LVT 3@12 rpm: 6290 cps ± 10%
Stability:     30 days at 50°C

More info::
Lipo Chemicals, Inc., 207 Nineteeth Avenue, Paterson, NJ
(973) 345-8600, Fax (973) 345-8365, Website: www.lipochemicals.com

Teens’ Rich Smooth Lotion for Dry Skin

Phase Phase A

Phase Phase B

Phase Phase C

Phase Phase D

Preparation::
Add phase A to phase B with stirring. Homogenize. Add phase C and D and stir well.

Important: If phase A has to be charged into the vessel first, phase B must be added without stirring.

More info::
Evonik Industries,  Essen, Germany, +49 (201) 173 - 2854, Fax: +49 (201) 173 -1828
Email: personal-care@degussa.com, www.degussa-personal-care.com

Marzipan Soufflé

Phase Phase A

Phase Phase B

Procedure::
Combine phase A ingredients. Add phase B to phase A with mixing. Mix until uniform.  (Formulation developed by S. Black.)

Comments::
This makeup base offers a unique texture and sebum control.

More info::
Dow Corning Corporation,  Tel: (989) 496-6000; Fax: (989) 496-5508,
lifesciences@dowcorning.com, Website: www.dowcorning.com/content/personal/

Natural Acne Cleaner

Phase Phase A

Procedure::
Add the first five components to water and heat to 70°C. Blend until all components are melted and dispersed. Cool to 60°C and add salicylic acid. Add Farmal HFS 2656 at 50°C.Add fragrance, preservative at 35° C. Cool and fill.

More info::
Corn Products International, Inc., 5 Westbrook Corporate Center, Westchester, IL 60154
(800) 443-2746, Website: www.farmalingredients.com

Mild Hair Cleansing & Caring Shampoo

Phase Phase A

Phase Phase B

Properties::
pH-value (as is):     5.0%
Viscosity (Brookfield RVT, 23°C,
spindle 4, 10 rpm):     5,200 mPas

More info::
Cognis GmbH Care Chemicals Division, Rheinpromenade 1,  D-40789 Monheim, Germany
Website:  www.cognis.com

Archived Formulary

Buyer's Guide

Search the 2008 Buyer's Guide for a company:

Search the 2008 Buyer's Guide for a category:

Search the 2008 Buyer's Guide for a term:

This will search both companies and categories