Formulary
Print

January 2009 formulary:

Natural Lotion Natural Hair Conditioner Mommy n’ Me Lavandin Diaper Cream Pain Killer Soothing Cream for Sensitive Skin O/W Facial Wipe for Mature Skin Economy Mild Nature-Derived Skin Care Lotion

Cream Powder Water-Resistant Mascara Cold Process Sheer Foundation (Light Beige) Day Cream with All-Q Plus and Amphisol K Ageless Beauty - Rejuvenating Conditioner

Natural Lotion

1. Deionized water

77.10

2. Esaflor HM22 (C18-22 alkyl hydroxypropyl guar)

0.20

3. Ritamulse SBL (Sodium behenoyl lactylate, stearyl alcohol)

8.00

4. Simchin Refined (Simmondsia chinensis (jojoba) seed oil)

5.00

5. Shebu Refined (Butyrospermum parkii (shea butter))

2.00

6. Rita Cocoa Butter NF (Theobroma cacao (cocoa)seed butter)

2.00

7. Rita Vitamin E Acetate (Tocopheryl acetate)

0.10

8. Ritipan D (Panthenol)

0.10

9. Phenoxyethanol (Phenoxyethanol)

0.50

10. Ritalab hydrolyzed soy flour (Hydrolyzed soy flour)

2.50

11. Ritalab pumpkin extract (Hydrolyzed cucurbita (pumpkin) seedcake)

2.50

Comments::
Slowly add 2 to 1 and mix until dissolved. Heat to 75°C. Combine 3-7 and heat to 75°C. Add to water phase and continue to mix while cooling. When <40°C, add remaining ingredients, mixing well.

More info::
RITA Corporation, P.O. Box 457, Crystal Lake, IL 60039-0457 USA
Tel.: 815-337-2500; Fax: 815-337-2523

Natural Hair Conditioner

Phase Phase A

Olivem 1000 (B&T Italy) (Cetearyl olivate, sorbitan olivate)

0.5

Emulium Kappa (Gattefosse) (Candelilla/jojoba/rice bran polyglyceryl-3 esters (and) glyceryl stearate (and) cetearyl alcohol (and) sodium stearoyl lactylate)

2.0

Tegosoft MM (Evonik Degussa) (Myristyl myristate)

0.5

Tea tree oil (Streuli) (Melaliuc)

0.1

Phase Phase B

Lanette 16 (Cognis) (Cetyl alcohol)

6.0

Di, water

89.40

Naviance maize (AkzoNobel) (Waxy maize)

1.0

Phase Phase C

Geoguard Ultra (Lonza) (Gluconolactone (and) sodium benzoate)

0.5

Procedure::
Heat phase A and B separately to 70°C. Add phase B to phase A. Homogenize. Cool with stirring and add phase C.

Properties::
pH:   3.98
Viscosity:   21 200 Brookfield sp/93/10rpm
Appearance:   Cream, smooth emulsion

More info::
AkzoNobel Personal Care, 10 Finderne Ave., Bridgewater, NJ, (888) 331-6212,
Fax: (908) 707-3664, Email: personalcare.usa@akzonobel.com

Mommy n’ Me Lavandin Diaper Cream

Phase Phase A

Glucate SS emulsifier (Lubrizol Advanced Materials)
(Methyl glucose sesquistearate)

4.20

Organic sunflower seed oil (Formula One Science) (Helianthus annuus (sunflower) seed oil)

9.00

Organic olive oil (Formula One Science) (Olea Europaea (olive) fruit oil)

5.00

Lanolin USP AAA lanolin product (Lubrizol Advanced Materials) (Lanolin)

1.00

Organic coconut oil (Formula One Science) (Cocos nucifera (coconut) oil)

1.00

Organic beeswax (Formula One Science) (Beeswax)

3.00

Glucamate SSE-20 emulsifier (Lubrizol Advanced Materials) (PEG-20 methyl glucose sesquistearate)

1.80

Phase Phase B

Zinc Oxide Z-Cote Max (BASF) (Zinc oxide, dimethoxydiphenylsi- lane/triethoxycaprylylsilane crosspolymer)

10.00

Phase Phase C

Deionized water

60.75

Versene Na2 crystals (Dow) (Disodium EDTA)

0.10

Bentone LT (Elementis Specialties) (Hectorite, hydroxyethylcellulose)

1.40

Phase Phase D

Chamomile Herbasol extract PG (Cosmetochem)
(Chamomilla recutita (matricaria) flower
extract, water, propylene glycol,
sorbitol, phenoxyethanol, methyl-, ethyl-, propyl-, butyl-, isobutylparaben)

1.50

Lavandin grosso pure oil (50-6153-02) (Lebermuth)
(Lavandula (Lavandin) hybrida oil)

0.20

Biovert enzyme and substrate preservative (Arch Personal Care Products)(Glucose, glucose oxidase, lactoperoxidase)

Part A: Substrate 1.00

Biovert enzyme and substrate preservative (Arch Personal Care Products) (Glucose, glucose oxidase, lactoperoxidase)

Part B: Enzyme 0.05

Procedure::
Phase A: In a suitable vessel, add phase A ingredients in order and mix at 200 RPM and heat to 75°C. Mix until uniform. Phase C: In a separate vessel, combine phase C ingredients and mix at 200 RPM and begin heating to 75°C. Add phase B into phase A while mixing at 400 RPM. Mix until uniform. Add phase D into phase C, mix until uniform, continue heating to 75°C. While both parts are at 75°C, add phase A/B (oil phase) to phase C (water phase) with good mixing, ~400RPM. Heat batch to 80-85°C with good mixing, ~400RPM for 10 minutes or until uniform. Remove heat and allow batch to cool. When batch has cooled to <40°C, add Chamomile Herbasol Extract PG and Lavandin Oil (fragrance) batch, mix until uniform. Add Biovert Enzyme & Substrate Preservative: First add the Biovert substrate solution (1%) followed by the Biovert enzyme solution (0.05%). Note: It is important to add the two components separately. Mix until uniform.

Product Properties::
Appearance:    White Smooth Viscous Cream
pH:   7.9 – 8.2
Viscosity (mPa·s):**    26,000 – 35,000
Stability:     Passed 12 weeks @ 45°C, 5 cycles freeze/thaw
Recommended Packaging:    Opaque squeeze tube

**   Brookfield RVT or DV-II @ 20 rpm, 25°C,
   #7 spindle, measured at 24 hours

More info::
Lubrizol Advanced Materials Inc. (Noveon Consumer Specialties), 9911 Brecksville Road, Cleveland, OH 44141-3247, Tel: 216-447-5000, 800-379-5389, Fax: 216-447-5250,
Website: www.personalcare.noveon.com

Pain Killer Soothing Cream for Sensitive Skin

Phase Phase A

Emulgade Sucro (Sucrose polystereate (and) hydrogenated polyisobutene)

2.0

Cutina PES (Pentraerythrityl distearate)

2.0

Cetiol Sensoft (Propylheptyl caprylate)

3.0

Eutanol G16S (Hexyldecyl stearate)

2.0

Cegesoft VP (Vegetable oil (and) hydrogenated
vegetable oil (and) euphorbia cerifera
(candelilla) wax)

1.0

Cosmedia SP (Sodium polyacrylate)

1.0

DC 200-350 cts (Dow Corning) (Dimethicone)

1.0

Phase Phase B

Water

80.35

Glycerin

3.0

Elestab CPN (Chlorphenesin)

0.2

Elestab PB Free LS 9842 (Water (and) phenoxyethanol
(and) glycerin (and) sorbic acid)

1.0

Keltrol CGT (Kelco) (Xanthan gum)

0.1

Eumulgin SG (Sodium stearoyl glutamate)

0.3

Phase Phase C

Skinasensyl LS 9749 (Water (and) glycerin (and) cocoglucoside (and) acetyl Tetrapeptide-15)

3.0

Parfum Aloe Vera Natco 0813384 (Expressions Parfumées)

0.05

Procedure::
Heat the oil phase A to 75-80°C and mix homogeneously. Heat phase B to 75-80°C and add to the oil phase while stirring. Allow the emulsion to cool while stirring in such a way that it remains in continual motion. Avoid incorporation of air. If necessary homogenize with a suitable dispersion unit (e.g. Ultra Turrax) approx. 55°C. Add phase C below 40°C with mixing. Stir while cooling until room temperature.

Characteristics::
pH value 6.0
Viscosity (mPas) Brookfield RVT, 23°C (spindle 5.10 rpm) 52.00

More info::
Laboratoires Serobiologiques, 2290 Argentia Road, L5N 6H9, Mississauga, Ontario, Canada
Tel: 416-843-6371; Fax: 905-542-7588; Website: www.laboratoires-serobiologiques.com

O/W Facial Wipe for Mature Skin

Phase Phase A

Tego Wipe Lux (Ethylhexyl stearate, sorbitan laurate, phenoxyethanol, cotton seed oil, polyglyceryl-4 laurate; dilauryl citrate)

5.0

Phase Phase B

Water, demineralized

92.0

Glycerin

1.5

Phase Phase C

Euxyl PE 9010 (Schülke & Mayr GmbH) (Phenoxyethanol, ethylhexylglycerin)

0.3

Phase Phase D

Skinmimics (Ceteareth-25, glycerin, cetyl alcohol, behenic acid, cholesterol, ceramide NP, ceramide NS, ceramide EOS; ceramide EOP, ceramide AP; caprooyl, sphingosine)

1.0

Parfum

0.2

Procedure::
Charge the vessel with phase A and add phase B with simple stirring. Add phase C to phase A/B while stirring. Add ingredients of phase D in the given order and stir well.

More info::
Evonik Goldschmidt GmbH, Goldschmidtstr. 100, 45127 Essen, Germany Tel: (49) 201-173-2854, Fax: (49) 201-173-1828, Email: personal-care@evonik.com, Website: www.evonik.com/personal-care

Economy Mild Nature-Derived Skin Care Lotion

1. Water [deionized]

90.78

2. Propylene Glycol USP EP (Dow) (Propylene glycol)

2.50

3. CoSept M (HallStar) (Methylparaben)

0.15

4. Carbopol 934 (Noveon) (Carbomer)

0.15

5. Sodium hydroxide NF (20% aqueous) (Sodium hydroxide)

0.32

6. HallStar KLA (HallStar) (Cetearyl alcohol (and) ceteareth-20)

1.50

7. HallStar MM (HallStar) (Myristyl myristate)

1.50

8. HallStar GMS Pure (Hallstar) (Glyceryl stearate)

1.00

9. RTD Stearic Acid V-1655 (Hallstar) (Stearic acid)

2.00

10. CoSept P (Hallstar) (Propylparaben)

0.10

Procedure::
(Use strong mixing, without aeration, throughout.) To main vessel add 1. Start mixing and begin heating to 45-50°C. Disperse 3 in 2 with mixing, heating as necessary to achieve solution. When 3 is fully dissolved, slowly add this premix to the main vessel with water at 45-50°C. With rapid but smooth agitation, very slowly add 4 to the main vessel (when an eductor is available, withhold some water for use with the eductor to incorporate 4). Continue heating this water phase to 75-80°C. Meanwhile, in a separate vessel combine 6 through 10 and heat this oil phase to 70-75°C and mix to make uniform and prevent overheating. When the water phase is at 75-80°C, with the carbomer fully dispersed (no “fish eyes”), slowly add 5 to the main vessel, maintaining strong mixing without aeration. After several minutes, when the batch is uniform, slowly add the uniform, 70-75°C, oil phase. Maintain the batch at 75°C for 20 minutes (until a uniformly small particle size emulsion is achieved) and then start cooling. At 45°C add fragrance and approved colorants as desired. Stop cooling and mixing when uniform and at desired filling temperature. Perform final quality assurance checks.

Product Characteristics::
(25°C, freshly prepared; uncolored and unfragranced)
Appearance: thick, smooth white lotion
Aesthetics: no tack during application or rub-in
Odor: bland and characteristic
pH (10% aq): 6.7
Viscosity (Brookfield RV, T-D, 5, 10, 50 & 100 rpm; cPs): 64000, 34800, 8920 & 4980
Stability: passed three freeze-thaw cycles and five months at 45°C

More info::
The HallStar Company, Chicago, IL, (877) 427-4255, (312) 385-4494
Fax: (908) 852-1335, E-mail: customerservice@hallstar.com, Website: www.hallstar.com

Cream Powder

Phase Phase A

Water

58.18

Glycerin

5.00

Propylene glycol

2.00

Ultrez 21

0.25

Urea

0.50

Phase Phase B

Cyclomethicone D5

3.00

Germaben II

0.60

Aloe Vera 100X

0.01

dl-Panthenol

0.05

Farmal 3757 (Corn Products International) (Zea mays (corn) starch)

30.00

Fragrance

0.20

Phase Phase C

TEA (85%)

0.21

Procedure::
Mix phase A with “lightnin” mixer to 55°C. Cool to 40°C and add phase B in order. When homogenous, switch to sweep mixer and add TEA (85%).

More info::
Corn Products International, Inc., 5 Westbrook Corporate Center, Westchester, IL 60154
(800) 443-2746, Website: www.farmalingredients.com

Water-Resistant Mascara

Phase Phase A

Deionized water

47.24

Veegum HV (R.T. Vanderbilt) (Magnesium aluminum silicate)

0.20

Keltrol (Kelco Corp.)(Xanthan gum)

0.20

Methylparaben (Ruger Chemical Co.)

0.25

Trisodium EDTA (Ruger Chemical Co.)

0.01

Phase Phase B

Lipo PE Base G-55 (Lipo Chemicals) (Glycerin (and) polyester-5)

12.00

Phase Phase C

Rose Talc (Presperse) (Talc)

3.00

Iron Oxide Black (Sun Chemical)

9.00

Phase Phase D

Triethanolamine, 99% (Ruger Chemical Co.)

1.50

Phase Phase E

Lipobee 102 (Lipo Chemicals) (Synthetic beeswax)

10.00

Carnuba wax (Hansotech)

4.50

Panalane H-300E (Lipo (Ineos) (Hydrogenated polyisobutene)

5.50

Lipo Stearic Acid (Lipo Chemicals)

3.00

Liposorb SQO (Lipo Chemicals) (Sorbitan sesquioleate)

1.30

Propylparaben (Ruger Chemical Co.)

0.20

Liponate NEB (Lipo Chemicals) (C12-15 alkyl benzoate)

1.00

Phase Phase F

Deionized water

1.00

Liposerve IU (Lipo Chemicals)

0.10

Procedure::
In main kettle, combine phase A ingredients and heat to 70°C. Mill phase A in a colloid mill. Add phases B and C and continue milling until pigment is dispersed uniformly. Add phase D. In a separate kettle, combine phase E ingredients and heat to 80-84°C. Heat combined phases A, B, C and D (water phase) pigment grind to 80-84°C and mix slowly to deaerate the batch. Add combined phase E to batch under slow sweep and emulsify the batch. Cool to 35°C, and add premixed phase F. Pour the batch at 30°C into a suitable container.

More info::
Lipo Chemicals, Inc., 207 Nineteeth Ave., Paterson, NJ
(973) 345-8600, Fax (973) 345-8365, Website: www.lipochemicals.com

Cold Process Sheer Foundation (Light Beige)

Phase Phase A

DI H2O

78.88

Titanium dioxide (Sensient)

2.20

Yellow iron oxide LC 181 (Sensient)

0.20

Brown iron oxide C33-115 (Sun Chemical)

0.10

Phase Phase B

Hydresia G2 (Botaneco) (Carthamus tinctorius (Safflower) oleosomes (and) glycerin (and) water)

12.00

Fragrance

q.s.

Phase Phase C

Natrulon H-10 (Lonza) (Polyglycerin-10)

5.00

Phase Phase D

Aristoflex AVC (Clariant) (Ammonium acryloyldimethyltaurate/VP copolymer)

1.10

Phase Phase E

Preservative

q.s.

Phase Phase F

Sodium hydroxide

q.s.

Procedure::
Mix phase A under high sheer (homogenizer recommended) until dispersed. Using a propeller blade, mix phase B on low speed (300 rpm) for 5 minutes. Add phase C to phase A and mix for additional 1 minute. Slowly add phase A to phase B and increase blade speed to 800 rpm to emulsify. Mix for 8-10 minutes. Slowly add phase D (thickener) to batch and mix @ 800 rpm until smooth (approx. 8-10 minutes). Add preservative and mix @ 300 rpm for 1 minute. Adjust PH to 6.5 using NaOH.

Description::
This cold process, sheer foundation is quick and easy to produce. The results: a natural, transparent and airbrushed look to the skin for those who want the look of a mineral powder foundation, but without the dryness.

More info::
Botaneco Inc., 3430 Progress Drive, Suite B, Bensalem, PA 19020
(215) 604-0634, Website: www.botaneco.ca

Day Cream with All-Q Plus and Amphisol K

Phase Phase A

Estol 3650 (Uniqema) (Glyceryl myristate)

1.00

Lanette O (Cognis Deutschland GmbH) (Cetearyl alcohol)

2.00

Myritol 318 (Cognis Deutschland GmbH) (Caprylic/capric triglyceride)

7.00

Phenonip (Clariant) Phenoxyethanol (and) methylparaben (and) ethylparaben (and) butylparaben
and propylparaben and isobutylparaben)

0.80

Amphisol K (DSM Nutritional Products) (Potassium cetyl phosphate)

2.00

Finsolv TN (Innospec Active Chemicals) (C12-15 alkyl benzoate)

6.00

Jojoba oil (Hänseler AG) (Simmondsia chinensis (jojoba) seed oil)

2.00

Dow Corning 345 Fluid (Dow Corning) (Cyclopentasiloxane and cyclohexasiloxane)

2.00

Phase Phase B

1,2-Propanediol (Fluka Chemie AG) (Propylene glycol)

5.00

Edeta BD (BASF) (Disodium EDTA)

0.10

Water dem.

67.05

Phase Phase C

Sepigel 305 (Seppic)(Polyacrylamide (and) C13-14
isoparaffin (and) laureth-7)

3.00

Phase Phase D

Potassium hydroxide (Merck KGaA)

0.05

All-Q plus (DSM Nutritional Products) (Ubiquinone (and) tocopheryl acetate (and) C12-15 alkyl benzoate)

2.00

Procedure::
Heat phase A to 85°C while stirring. Heat phase B to 80°C and add to phase A while stirring and homogenizing the emulsion. Cool down the emulsion to 55°C and add phase C. Cool down further to 35°C and add phase D together with the perfume oil. It is highly recommended to remove oxygen as much as possible by using vacuum while producing the product.

Properties::
pH: 6.55
Viscosity: 94200 cps
(Brookfield, RV 6, 10 rpm)

More info::
DSM Nutritional Products, 45 Waterview Blvd., Parsippany, NJ 07054
(973) 257-8501, Fax: (973) 257-8580, Website: www.nutraaccess.com