Age Defense Cream

Phase Phase A

Phase Phase B

Phase Phase Z

Procedure::
eat phase A and B separately to approximately 70 - 75°C. Add phase A to phase B with stirring.* Homogenize. Cool with gentle stirring.

*Important: If phase A has to be charged into the vessel first, phase B must be added without stirring.

More info::
Evonik Goldschmidt GmbH, Goldschmidtstr. 100, 45127 Essen, Germany
(49) 201-173-2854, Fax: (49) 201-173-1828, Email: personal-care@evonik.com,
 Website: www.evonik.com/personal-care

Antiperspirant/Deodorant Stick

Procedure::
Combine all the ingredients in the above order in a vessel while stirring and begin to heat. Continue to stir and heat until all the ingredients are completely dispersed and uniform. This should happen at a temperature of 75-80°C. Once mixture has become uniform, cool the formulation. At 70-72°C, pour batch into proper mold.

More info::
Air Products & Chemicals Personal Care
Tel.: 610-481-6799, Website: www.airproducts.com/personalcare

Low pH Resurfacing Facial Peel

Phase Phase A

Phase Phase B

Phase Phase C

Procedure::
Phase A: Disperse Natrosol Plus CS 330 and glycerin in water. Mix until Natrosol Plus is fully dispersed (Note: Heating to 60-65°C will speed up hydration process. If heat is used, once Natrosol  Plus is fully hydrated, remove batch from heat and continue adding ingredients while batch cools.) Add Carbopol* Aqua CC Polymer to phase A.  Mix until uniform.     Add glycolic acid to batch. Mix until uniform. As batch begins to thicken, increase speed to maintain a good vortex. Add polyethylene to batch. Mix until uniform. Once  batch has cooled to ~ 25 °C (if heat was used), add phase  C ingredients one at a time with good mixing in between additions. Mix until uniform. Adjust deionized water for any water loss. (If heat was used in processing).

Product Properties::
Appearance: Semi-translucent, beige gel
pH: 3.50 – 4.00
Viscosity (mPa·s): 30,000 – 35,000     
(Brookfield RVT @ 20 rpm, 25°C, #6 spindle, measured after 24 hours)
Yield Value (dyn/cm²): 1,400 – 1,700
Stability:
Passed 8 weeks @ 50°C, 4 cycles freeze/thaw
Recommended Packaging:
Flip-up top squeeze tube with a narrow opening

*Carbopol  Aqua CC Polymer (%TS):  2.20
**Distributed by International Sourcing, Inc.

More info::
Lubrizol Advanced Materials Inc. (Noveon Consumer Specialties), 9911 Brecksville Road, Cleveland, OH 44141-3247,  Tel: 216-447-5000, 800-379-5389, Fax: 216-447-5250
 Website: www.personalcare.noveon.com

Cloud of Care TW 1759

Phase Phase A

Phase Phase B

Procedure::
Prepare phase A in a blender for powders.  Prepare phase B. Add phase A to phase B at room temperature under stirring.

More info::
LCW - Sensient Cosmetic Technologies, 7-9, rue de l’Industries -95310 Saint Ouen l’Aumône, France; Tel: 33 (0)1 34 48 57 00; Fax: 33 (0)1 34 64 44 40

Anti-Aging SPF ~20, PFA ~9 Facial Moisturizer

Phase Phase A

Phase Phase B

Phase Phase C

Phase Phase D

Phase Phase E

Phase Phase F

Phase Phase G

Phase Phase H

Phase Phase I

Procedure::
Combine A, start mixing, add B, and heat to 90°C.  Then add C to AB in order. In a second vessel add D, start mixing, and add E in order.  Heat to 90°C. In a third vessel premix F and add to DE just prior to combining phases. When ABC and DEF are uniform and at the defined temperatures, add ABC to DEF with strong mixing without aeration. After 10 minutes, start homogenizing and start cooling. When the batch is at 55°C, stop homogenizing and resume sweep mixing. When the batch is at 50°C add G. In a separate vessel combine H and, when uniform, add to ABCDEFG. When the batch is uniform add I. Continue stirring until a smooth, homogeneous lotion and pe form final quality assurance checks.

Comments::
This globally-acceptable, daywear-quality formula delivers superior broad-spectrum protection by using Polycrylene, a novel polymeric sunscreen stabilizer and substantivity aid.

Characteristics (25°C)::
Appearance: Off-white cream
pH: 5.9
Viscosity (RV, T-D, 5, 20 & 100 rpm; cP):
59000, 20600 & 6400.  
U.S. Patent Nos. 6,962,692; 6,800,274; 6,350,894; 5,849,273; 5,788,954; 5,783,173.  
*No substitution permitted.

More info::
The HallStar Company,  Chicago, IL, (877) 427-4255, (312) 385-4494
Fax: (908) 852-1335, E-mail: customerservice@hallstar.com, Website: www.hallstar.com

Eye Cream with BeauActive MTP

Phase Phase A

Phase Phase B

Phase Phase C

Procedure::
Heat phase A and phase B to 85°C. When both have reached the same temperature, add phase B to phase A while homogenizing intensively. Cool down the product to 35°C while stirring. Now add phase C and homogenize intensively again. It is generally recommended to use vacuum while producing the emulsion.

Properties::
pH: 5.45
Viscosity: 14560 cps (Brookfield, RV5, 10 rpm)

More info: :
DSM Nutritional Products, 45 Waterview Blvd., Parsippany, NJ 07054
(973) 257-8501, Fax: (973) 257-8580, Website: www.nutraaccess.com

Lipstick with DR-415 Candelilla Substitute

Phase Phase A

Phase Phase B

Phase Phase C

Procedure::
Combine the first wto ingredients of phase A in mixing vessel. Begin heating to 85-90°C with propeller agitation (PA). Add waxes and heat to 85-90°C with PA. Mix until uniform. Cool batch to 75-80°C and add remaining ingredients of phase A with moderate PA. Add color mixes of phase B to batch and mix one hour at 75-80°C with moderate PA. Adjust batch for shade. Add phase C at 75-80°C and mix with slow PA (avoid aeration) for 15 minutes. Pour into molds at 75°C, cool and insert into lipstic bases and flame.

More info::
Strahl & Pitsch Inc., 230 Great East Neck Road, West Babylon, NY 11704
Tel.: (631) 587-9000, Fax: (631) 587-9120; Email: info@strahlpitsch.com; Website: www.spwax.com

Archived Formulary

Buyer's Guide

Search the Buyer's Guide for a company:

Search the Buyer's Guide for a category:

Search the Buyer's Guide for a term:

This will search both companies and categories