Phase A | |
Deionized water | 58.90 |
Stabileze QM (ISP) (PVM/MA decadiene crosspolymer) | 0.50 |
Glycerin | 3.00 |
Versene NA (Dow Chemical) (disodium EDTA) | 0.10 |
Phase B | |
Escalol 567 (ISP) (oxybenzone) | 2.00 |
Escalol 557 (ISP) (octinoxate) | 7.50 |
Escalol 517 (ISP) (avobenzone) | 1.00 |
Ceraphyl 368 (ISP) (ethylhexyl palmitate) | 2.00 |
X-Tend 226 (ISP) (phenethyl benzoate) | 10.00 |
Ceraphyl 140A (ISP) (isodecyl oleate) | 1.50 |
Ceraphyl SLIK (ISP) (isodecyl neopentanoate) | 3.00 |
Cerasynt 840 (ISP) (PEG-20 stearate) | 1.50 |
Cerasynt 945 (ISP) (glyceryl stearate (and) laureth-23) | 2.00 |
Phase C | |
Triethanolamine 99% | 0.50 |
Deionized water | 5.00 |
Phase D | |
Optiphen Plus (ISP) (phenoxyethanol (and) caprylyl glycol (and) sorbic acid) | 1.50 |
Procedure | |
Slowly sprinkle Stabileze QM into water of phase A with mixing. Once Stabileze is completely dispersed, heat and maintain at 80°C for approximately 45 minutes with mixing. Add disodium EDTA and glycerin to phase A with mixing. Combine ingredients in phase B and heat to 75-80°C with mixing. Add phase C to phase A; mix for five minutes. Add phase B to phase A/C; mix until homogeneous. Cool to 45°C, then add in phase D with mixing. Q.S. for water loss. | |
Properties | |
pH: 5.50; viscosity: 17,600 cps (Brookfield model RVT, TB @ 5rpm) | |
More Information | |
ISP, 1361 Alps Road, Wayne, NJ 07470 Tel: (973) 628-4000; Fax: (973) 628-4067; Website: www.ispcorp.com |