Formulary

Protective Foundation SF 1229/E

Released by Gattefosse Corporation

May 1, 2011


Phase A
Plurol Diisostearique CG
4.00
(Gattefosse) (Polyglyceryl-3- Diisostearate)
Hydracire S (Gattefosse)
2.00
(Acacia decurrens/jojoba/sunflower seed wax/ polyglyceryl-3-esters) Compritol 888 CG Pellets (Gattefosse)
(Glyceryl behenate)
1.00
Hydrogenated castor oil
1.00
Preservative
1.00
Rheocin (Rockwood Additives)
(Trihydroxystearin)
1.00
Unipure White LC 981 HLC (LCW/Sensient)
6.95
(Titanium dioxide (CI 77891))
Unipure Yellow LC 182 HLC (LCW/Sensient)
1.00
(Iron oxides (CI 77492))
Unipure Red LC 381 HLC (LCW/Sensient)
.30
Unipure Red LC 381 HLC (LCW/Sensient)
Natpure Hollowbead (LCW/Sensient)
2.00
(Calcium aluminium borosilicate)
Talc HLC (LCW/Sensient) (Talc)
2.00
Glycerin
5.00
Magnesium sulfate 7H2O, Codex (Merck)
1.00
(Magnesium sulfate)
Sodium chloride, Codex (Sodium chloride)
1.00
(Propanediol (and) water (and) hordeum vulgare seed extract)
Perfume Supreme Teint ARX/31619 (Aromax)
.30

Phase B
MOD (Gattefosse) (Octyldodecyl myristate)
6.00

Phase C
Vegetable squalane
14.0

Phase D
Demineralized water
49.95

Phase E
Malt Secrets (Gattefosse)
0.50

Procedure
Prepare phase A and heat to 85°C. Prepare phase B, under rapid mixing add Rheocin and mix for 10 min. Heat at 40°C (donu2019t overheat). Under moderate mixing, add phase B into phase A. Mix under ultra-turrax for 5 min. Add phase C into A+B then heat to 80°C. Prepare D and heat to 80°C. Add slowly phase D into phase A+B+C and increase speed to 3000 tr/min. Maintain rapid mixing for about 5 min. Cool under mixing and about 35°C, add phase E. Complete cooling.

Properties
Appearanceu2014Pinkish beige cream; Viscosity Brookfield (spindle C speed 5)u2014approx. 100,000 mPa.s after 24H. Antibacterial Moisturizing Hand Soap

More Information

Gattefossu00e9 USA

201-265-4800 u2022 Fax: 201-265-4853

Website: www.gattefosse.com

Related End-User Markets:

blog comments powered by Disqus
  • Wacker Builds on Its Success

    Wacker Builds on Its Success

    Tom Branna, Editorial Director ||May 2, 2016
    The silicone maker had a good 2015 and expects the gains to continue in 2016, driven, in part, by success in the Americas and

  • Who Makes That?

    Who Makes That?

    Tom Branna, Editorial Director||April 1, 2016
    From concept and formulation to testing and filling, today’s contract manufacturers perform a range of services for marketers

  • New Sun Care Ingredients

    March 1, 2016
    Here is a list of new ingredients for sun care that have been introduced by industry suppliers during the past 12 months. For information regarding any of the products listed here, contact the supplier directly using the information provided.