Formulary

Anti-Aging Moisturizing Day Cream

Released by The HallStar Company

June 1, 2011


Phase A
Deionized water
68.87
Versene NA (Dow Chemical) (Disodium EDTA)
0.05
Rhodicare XC (Rhodia) (Xanthan gum)
0.20

Phase D
1,3-Butylene glycol (Argo) (Butylene glycol)
2.00
Superol K, Glycerine 99.7% USP/FCC Kosher (P&G Chemicals) (Glycerin)
2.00
Diocide (Centerchem) (Caprylyl glycol, phenoxyethanol, hexylene glycol)
1.00
Jojoba Oil - Ultra Refined (HallStar BioChemica) (Simmondsia chinensis (jojoba) seed oil)
3.00
SolaStay S1 (HallStar) (Ethylhexyl methoxycrylene)
3.00
Shea Butter u0096 Ultra Refined (HallStar BioChemica) (Butyrospermum parkii (shea butter))
2.00
Sunflower Seed Oil (HallStar BioChemica) (Helianthus annuus (sunflower) seed oil)
2.00
HallStar GMS SE/AS (HallStar) (Glyceryl stearate, PEG-100 stearate)
2.00
Emulsiphos (Symrise) (Potassium cetyl phosphate, hydrogenated palm glycerides)
1.00
AS 5812 (Color Techniques) (Titanium dioxide, triethoxycaprylylsilane)
0.50
RITA Vitamin E Acetate (RITA) (Tocopheryl acetate)
0.67
Retinol 15D (BASF) (Caprylic/capric triglycerides, retinol)
0.28

Phase E
HallStar GC (HallStar) (Caprylic/capric triglycerides)
5.00

Phase F
HallStar GMS Pure (HallStar) (Glyceryl stearate)
1.35

Phase G
BHT (Merisol Antioxidants) (BHT)
0.08

Phase H
Simulgel 600 (Seppic) (Acrylamide/sodium acryloyldimethyltaurate copolymer, isohexadecane, polysorbate 80)
3.00

Phase I
MSS-500W (Kobo Products) (Silica)
2.00

Procedure
Water phaseu0097Add phase A and phase B to a suitable vessel equipped with mixing, heating and cooling capabilities. When phase B is dissolved, add phase C. When phase C is fully hydrated, start heating to 140°F (60°C). Premix phase D and add during heating of batch. Oil phaseu0097In a separate vessel, combine E, start mixing, and heat to 176°F (80°C). Add phase F ingredients in order. Cool to 149°F (65°C), then add phase G to batch with mixing. When both batches are homogeneous and at their designated temperatures, add phase EFG to phase ABCD with continued mixing at a high shear for two minutes. Homogenize for 10 minutes, resume mixing, and start cooling. At 122°F (50°C) or lower, add phase H and mix well, then add phase I and mix well. Cool to ambient temperature. Add water as needed to bring to full batch mass. When again uniform, stop mixing and perform final quality assurance checks.

Properties
(25°C): Appearanceu0097Light yellow cream; Viscosityu0097(RV, T-D, 5, 20 & 100 rpm, cP): 76000, 25000 & 7880; pHu00976.0.

More Information
The HallStar Company (877) 427-4255, (312) 385-4494 Email: customerservice@hallstar.com Website: www.hallstar.com

Related End-User Markets:

  • The World Comes to Orlando

    The World Comes to Orlando

    Tom Branna, Editorial Director||December 1, 2016
    More than 1,600 chemists traveled to Florida for the IFSCC Congress

  • Perform or Perish

    Perform or Perish

    Christine Esposito, Associate Editor||December 1, 2016
    Success in today’s skin care sector begins with active ingredients, formulated in products that address modern-day issues.

  • Soap Opera

    Soap Opera

    Christine Esposito, Associate Editor||November 2, 2016
    FDA’s recent antibacterial ruling has soap sector stakeholders scrambling to keep some ingredients in their formulation kit.