Phase A | |
Deionized water | 66.33 |
Disodium EDTA | 0.05 |
Sensomer CT-250 Polymer (Lubrizol/Noveon) (Cassia hydroxypropyltrimonium chloride) | 0.30 |
Mirataine BET C-30 (Rhodia) (Cocamidopropyl betaine (35% TS) | 5.00 |
Texapon ALES 3-70 (Cognis) (Ammonium laureth sulfate (70% active, 3 mole) | 12.86 |
Texapon ALS-70 (Cognis) (Ammonium lauryl sulfate (70% active) | 8.60 |
Comperlan 100C (Cognis) (Cocamide MEA) | 0.60 |
Lanette O (Cognis) (Cetearyl alcohol) | 0.30 |
Cutina AGS T (Cognis) (Glycol distearate) | 1.50 |
Glydant Plus Liquid (Lonza) (DMDM hydantoin (and) iodopropynyl butylcarbamate) | 0.30 |
Perfume SN 132N (Givaudan) (fragrance) | 0.60 |
Ammonium chloride (25% solution) | 0.23 |
Phase B | |
Dow Corning 2-1491 (Dow Corning) (Dimethicone, laureth-23 (and) C12-15 pareth-3 (60% TS)) | 3.33 |
Procedure | |
Phase Au0097add Disodium EDTA to deionized water, mix until dissolved. Add Sensomer CT-250 polymer to deionized water with high speed agitation until uniform. Heat batch to 75°C with gentle mixing. Add surfactants (ingredients 4-6) to batch in order with good mixing. Mix until uniform. Add ingredients 7-9 with mixing. Mix until melted and uniform. Remove heat and cool to ~25°C with mixing. Phase Bu0097add phase B ingredients to batch in order with mixing. Mix until uniform. | |
Properties | |
Appearanceu0097white pearlized emulsion; pHu00975.4-5.8; Viscosity (mPau0095s (Brookfield DV-II @ 20 rpm, #5 spindle, @25°C measured after 24 hours)u00978,000-12,000; Stabilityu0097Passed 3 months @ 45°C, passed 5 freeze/thaw cycles; Surfactant (% TS/actives)u009717.4. | |
More Information | |
Lubrizol Lubrizol Advanced Materials Inc. (Noveon Consumer Specialties) (216) 447-5000 u0095 www.personalcare.noveon.com |