02.01.12
Phase A | |
Water (aqua) (deionized) | 62.77 |
Versene NA (Dow Chemical) (Disodium EDTA) | 0.05 |
Superol K, Glycerine 99.7% USP/FCC Kosher (P&G Chemicals) (Glycerin) | 2.00u2028 |
Diocide (Centerchem) (Caprylyl glycol, u2028phenoxyethanol, hexylene glycol) | 1.00 |
Triethanolamine 99% (Dow Chemical) (Triethanolamine) | 0.20 |
BioChemica Jojoba Oil - Ultra Refined (HallStar) (Simmondsia chinensis (jojoba) seed oil) | 3.00u2028 |
BioChemica Sunflower Seed Oil (HallStar) (Helianthus annuus (sunflower) seed oil) | 2.00 |
SolaStay S1 (HallStar) (Ethylhexyl methoxycrylene) | 4.00 |
HallStar GMS Pure (HallStar) (Glyceryl stearate) | 0.75 |
HallStar GMS SE/AS (HallStar) (Glyceryl stearate, u2028PEG-100 stearate) | 2.50 |
HallStar TA-1618 Cetearyl Alcohol (HallStar) u2028(Cetearyl alcohol) | 0.50 |
AS 5812 (Color Techniques) (Titanium dioxide, triethoxycaprylylsilane) | 0.50u2028 |
BioChemica Vitamin E Natural (HallStar) (Tocopherol) | 0.67 |
Retinol 15D (BASF) (Caprylic/capric triglyceride, retinol) | 0.28 |
Velvesil 125 (Momentive) (Cyclopentasiloxane, u2028C30-45 alkyl cetearyl dimethicone crosspolymer) | 4.50 |
Phase B | |
Carbopol ETD 2050 (Noveon /Lubrizol) (Carbomer) | 0.20 |
Phase C | |
1,3-Butylene Glycol Cosmetic Quality u2028(Oxea) (Butylene glycol) | 2.00 |
Phase D | |
HallStar GC (HallStar) (Caprylic/capric triglyceride) | 5.00 |
Phase E | |
BioChemica Shea Butter u0096 Ultra Refined (HallStar) (Butyrospermum parkii (shea butter)) | 2.00 |
Phase F | |
BHT (Merisol Antioxidants) (BHT) | 0.08 |
Phase G | |
Dow Corning 345 Fluid (Dow Corning) (Cyclopentasiloxane, cyclohexasiloxane) | 4.00u2028 |
Phase H | |
MSS-500W (Kobo Products) (Silica) | 2.00 |
Procedure | |
To a suitable vessel equipped with mixing, heating and cooling capabilities, add phase A and start mixing. When dissolved, add phase B. When phase B is fully hydrated, start heating to 140°F (60°C). Premix phase C and add during the heating of this water phase. In a separate vessel, combine phase D, start mixing, and heat to 176°F (80°C). When this oil phase is at 176°F (80°C), add phase E in order. Mix until homogeneous, then cool to 149°F (65°C). Add phase F in order, with mixing, then immediately add the oil phase to the water phase when both phases are homogeneous and at their designated temperatures. Continue mixing at a high shear for two minutes. Homogenize for 10 minutes, then resume mixing and start cooling. At 122°F (50°C) or lower, add homogeneous premix of phase G and mix well. Add phase H and mix well. Cool to desired filling temperature and add water to bring to full batch mass. When again uniform, stop mixing and perform final quality assurance checks. | |
Properties | |
(25°C): Appearanceu2014Pale yellow lotion; Viscosity (RV, T-D, 5, 20 & 100 rpm, cP)u201421000, 7200 & 2300; pHu20146.2. | |
More Information | |
The HallStar Company 877-427-4255; 312-385-4494 Email: customerservice@hallstar.com www.hallstar.com |