Welcome Guest to Happi

Subscribe Free: Magazine | eNewsletter

current issue December 2014
 •  Charlotte Tilbury Channels Hollywood  •  Croda Reveals Findings on Volarest FL  •  Lubrizol Joins Roundtable on Sustainable Palm Oil  •  Antitrust Regulator in France Fines Major Companies  •  Paradigm Science‚Äôs Cervino Wins Award
Print

Line Eraser Gel with Lipolight OAP/PVA



Released by Lipo Chemicals, Inc.
Published August 1, 2012
Related Searches: Skin Care Actives Preservatives
Post a comment

Phase A
Deionized water
65.90
Laponite XLG (Southern Clay) (Sodium magnesium silicate)
0.20
Liponic EG-1 (Lipo) (Glycereth-26)
3.00
Preservative (Lipo Chemicals)
q.s.
LipoLight OAP/PVA (Lipo Chemicals) (Nylon-12 fluorescent brightener 230 salt (and) polyvinylalcohol crosspolymer)
3.00

Phase B
Tetrasodium EDTA (Ruger Chemical) (Tetrasodium EDTA)
0.10

Phase C
Carbopol 980 (Lubrizol)
0.30

Phase D
Preservative
q.s.

Phase E
TEA, 99% (Ruger Chemical Co.) (Triethanolamine)
0.50

Phase F
Zilgel VV (Presperse, Inc.) (Glycerin (and) sodium polyacrylate)
10.00

Phase G
Deionized water
1.00

Phase H
Hyaluronic acid (1% solu0092n) (Lipo Chemical) (Sodium hyaluronate)
1.00

Phase I
Deionized water
15.00

Phase J
TEA, 99% (Ruger Chemical) (Triethanolamine)
q.s.

Procedure
Mix the water from phase A with high-speed propeller agitation. Slowly sprinkle in the remaining phase A ingredient, mix until clear. Add phase B ingredients to phase A and keep mixing speed on high. Slowly sprinkle in phase C ingredient with high speed propeller mixing. Mix until free of any lumps and batch is homogeneous. Mixing speed can now be reduced and phase D ingredient added with mixing. Heat the batch to 75°C with medium speed propeller mixing. Once batch is at 75°C and uniform, then the batch can be slowly cooled to 60°C. Add phase E to batch. Batch will thicken and continue mixing until clear and uniform. Continue slow cooling of batch and add phase F with mixing. At 35°C, add premixed phase G ingredients to batch with mixing. Add phase H ingredient to batch, mix until dispersed completely. Add premixed phase I slurry, that was mixed with high-speed propeller agitation, to the batch and mix until completely dispersed. Batch will turn white color. If necessary, adjust pH to within specification using phase J.

Properties
s + 10%; Stabilityu201430 days at 50°C.

More Information
Lipo Chemicals
973-345-8600
Fax: 973-345-8365
Website: www.lipochemicals.com


blog comments powered by Disqus