Phase A | |
Siltext Iridescent (Coast Southwest/Cru00e9ations Couleurs) (Glyceryl polyacrylate (and) dimethicone (and) hydrogenated polyisobutene (and) preservative system) | 10.00 |
Hydrasoft Sea (Coast Southwest/Cru00e9ations Couleurs) (Water (&) algae extract (&) natto gum (&) citric acid (&) preservative sys. | 30.00 |
Hydrasoft Cushion (Coast Southwest/Cru00e9ations Couleurs) (Glyceryl polymethacrylate (&) butylene glycol (&) zea mays (corn) starch (&) chlorphenesin) | 4.00 |
Hydrasoft Moist (Coast Southwest/Cru00e9ations Couleurs) (Glyceryl polymethacrylate (&) propylene glycol (&) chlorphenesin) | 15.00 |
Chlorphenesin | 0.20 |
Dissolvine NA2-S (Coast Southwest) (Disodium EDTA) | 0.05 |
Glyceryl laurate | 0.60 |
TEA-lauryl sulfate | 0.92 |
Decyl glucoside | 0.73 |
Disodium laureth sulfosuccinate | 0.25 |
Creasoluble Nu00ba1 (Coast Southwest/Cru00e9ations Couleurs) (PPG-26-buteth-26 (and) PEG-40 hydrogenated castor oil (and) water) | 0.60 |
Cola (Water (and) glucose (and) caramel (and) phosphoric acid u0093natural flavoringsu0094) | 5.00 |
Phase B | |
Water | q.s. |
Phase C | |
Hyaluronic acid | 0.02 |
Phase D | |
Fiflow BB 61 (Coast Southwest/Cru00e9ations Couleurs) Perfluorohexane (and) perfluorodecalin (and) pentafluoropropane) | 10.50 |
Procedure | |
Phase A-Mix phase A ingredients. No heating necessary. Phase Bu2013Mix phase B ingredients and heat up to 70-75°C until homogenous. Cool down phase B to below 40°C and add phase B into phase A. Homogenize (6,000 rpm) for 3-5 min. Add phase C and phase D into the mixture (A+B) and homogenize for maximum 1 min. Before adding phases C and D, make sure the temperature of the mixture is below 35°C. Keep stirring the mixture until homogeneous. Note: Use sufficient preservative system; we do not guarantee microbiological stability. | |
More Information | |
Coast Southwest, Inc. 800-621-0500 www.coastsouthwest.com |