Welcome Guest to Happi

Subscribe Free: Magazine | eNewsletter

current issue Wipes 2014
Print

O/W Lightweight Sunscreen Lotion SPF 30+



Published September 1, 2012
Related Searches: Skin Care Preservatives Actives Sun Care
Post a comment

Phase A
Deionized water
50.65
Propylene glycol (Wako Pure Chemical Industries)
2.00
Phenonip (Clariant)(Phenoxyethanol (&) methylparaben (&) ethyl- paraben (&) butylparaben (&) propylparaben (&) isobutylparaben)
1.00
Dissolvine NA2-S (AkzoNobel) (Disodium EDTA)
0.10
Carbopol 940 (Lubrizol)
0.30
Dermacryl AQF (45% active) (AkzoNobel) (Acrylates copolymer)
4.40
Neo Heliopan HMS (Symrise) (Homosalate)
12.00
Neo Heliopan 357 (Symrise) (Avobenzone)
3.00
Neo Heliopan BB (Symrise) (Benzophenone-3)
4.00
Neo Heliopan OS (Symrise) (Ethylhexyl salicylate)
5.00
Finsolv TN (Innospec Active Chemicals) (C12-15 alkyl benzoate)
5.00
Arlacel 165 (Croda, Inc.) (Glyceryl stearate (and) PEG-100 stearate)
3.10
Triethanolamine-99% (Ashland Chemical) (Triethanolamine)
0.45

Phase B
Neo Heliopan 303 (Symrise) (Octocrylene)
2.00

Phase C
Deionized water
2.00

Phase D
Dry-Flo TS starch (AkzoNobel) (Tapioca starch polymethylsilsesquioxane)
5.00%

Procedure
Add deionized water with propylene glycol, disodium EDTA and Phenonip to main beaker and begin heating to 75-80°C with low homogenizer mixing (2000-3000 rpm). Once dispersed, sprinkle in Carbopol 940 and homogenize at low to moderate speed (2000-3000 rpm) until hydrated. Then add Dermacryl AQF to main beaker and mix until dispersed. Add phase B ingredients to side beaker and begin heating to 75-80°C with propeller mixing at 300 rpm. Once phases A and B reach desired temperatures, add phase B to phase A with moderate homogenization (4000 rpm) mixing for 10 min. at 75-80°C. Begin cooling batch to 45°C. Pre-mix phase C and add to main beaker once temperature gets below 45°C. Homogenize (4000 rpm) for 5 min. until dispersed and uniform. Add phase D to main beaker and homogenize (4000 rpm) until fully dispersed and uniform. Switch batch to sweep blade and mix at 20 rpm while cooling to 25°C.

Properties
Appearanceu2014Off-white cream; pHu20146.25-6.75pH meter; Viscosityu201415000-21000 cps Brookfield RVT, Spindle C, Speed 10, 1 minute, 25°C.

More Information
AkzoNobel Surface Chemistry
888-331-6212
www.akzonobel.com/PersonalCare


blog comments powered by Disqus