Formulary

Light and Natural BB Cream

Released by Lubrizol

February 1, 2013


Phase A
Novemer (Lubrizol) EC-2 Polymer (20%TS) (Sodium acrylates/beheneth-25 methacrylate crosspolymer (and) hydrogenated polydecene (and) lauryl glucoside)
2.50
Deionized water
54.93
Glucam E-20 Humectant (Lubrizol) (Methyl gluceth-20)
1.50
Schercemol DIA Ester (Lubrizol) (Diisopropyl adipate)
2.00
Schercemol CATC Ester (Lubrizol) (Cocoyl adipic acid/trimethylolpropane copolymer)
1.50
Schercemol NGDO Ester (Lubrizol) (Neopentyl glycol diethylhexanoate)
1.00
Parsol MCX (DSM) (Ethylhexyl methoxycinnamate)
7.00
TSF 451, 350 cS (Momentive) (Dimethicone)
2.00
Glucam P-20 humectant (Lubrizol) (PPG-20 methyl glucose ether)
1.00
Caprylic/capric triglyceride
1.00
Transcutol CG (Gattefossu00c3u00a9) (Ethoxydiglycol)
0.50
Colorona Carmine Red (Merck) (Mica (and) titanium dioxide (and) carmine)
0.50
Timiron Silk Gold (Merck) (Titanium dioxide (and) mica)
0.50
Flamenco Satin Pearl 3500 (BASF) (Mica (and) titanium dioxide)
1.00
Unipure Red LC381 (Sensient) (Iron oxides)
0.16
Unipure Yellow LC182 (Sensient) (Iron oxides)
0.16
Deionized water
15.00
PC161 (Givaudan) (Fragrance)
0.50
Glydant Plus Liquid (Lonza) (DMDM hydantoin (and) iodopropynyl butylcarbamate)
0.40

Phase B
SilSense DW-18 Silicone (Lubrizol) (Dimethicone PEG-7 isostearate)
0.50

Phase C
MT-100TV (Tayca) (Titanium dioxide (and) aluminum hydroxide (and) stearic acid)
1.75

Phase D
Niacinamide
4.00

Phase E
Gatuline Expression (Alcohol (and) water (and) acmella oleracea extract)
0.60

Procedure
Disperse Novemer EC-2 Polymer in deionized water with moderate mixing. Add Glucam E-20 Humectant into the dispersion. Phase Bu2014In separate vessel, combine phase B ingredients with mixing. Phase Cu2014In a separate vessel, mix phase C ingredients and pass through a sieve (100 mesh) twice. Add pre-sieved phase C to phase B with mixing. Mix until uniform pigment dispersion is achieved. Slowly add phase B/C using continuous mixing to phase A. Mix until uniform. (For large batches, a side scraper must be installed). Phase Du2014In a separate vessel, dissolve Niacinamide in deionized water. Slowly add phase D to main batch with mixing. Mix until homogeneous. Phase Eu2014Add part E ingredients to batch one at time with mixing. Mix for 10-15 minutes or until the batch is homogeneous. Notes: A regular mixer is used to make a small batch of this formula, Stirrer DLH VELP Scientific. When making a large batch, it is ideal to use a roller mill. A more uniform color and texture will be formed if the whole batch is put through a roller mill 2-3 times.

More Information
Appearanceu2014Tan (Tinted) Cream; pHu20146.5-7.5; Viscosity (mPau00b7s) (Brookfield DVII+ Viscometer spindle #6 @ 20 rpm, 25u00a0°C @ 24 hours)u201410,000-15,000; Yield Value (dyn/cmu00b2)u2014100-200; SPF Static: 20 and SPF Very Water resistant (after 80 minutes immersion)u201418 (SPF determined by In Vitro testing using the Labsphere UV-1000S Transmittance Analyzer); Stabilityu2014Passed 3 months at RT & 45°C and Passed 5 freeze/thaw test cycles; Recommended Packagingu2014Pump with bottle or tube.

More Information
Lubrizol Advanced Materials
800-379-5389 or 216-447-5000
Website: www.lubrizol.com/personalcare

Related End-User Markets:

  • What the Halal  Is Going On?

    What the Halal Is Going On?

    Imogen Matthews , In-Cosmetics||February 2, 2017
    Demand for these beauty products is surging thanks to a fastgrowing Muslim population.

  • Defining Clean Skin

    Defining Clean Skin

    Nava Dayan PhD, Dr. Nava Dayan LLC||February 1, 2017
    A look at the issues, research and history surrounding this controversial topic.

  • Linked In

    Linked In

    Christine Esposito , Associate Editor||February 1, 2017
    Through virtual reality, apps and connected devices, beauty and personal care brands can strengthen their customer relations