Welcome Guest to Happi

Subscribe Free: Magazine | eNewsletter

current issue December 2014
 •  Charlotte Tilbury Channels Hollywood  •  Croda Reveals Findings on Volarest FL  •  Lubrizol Joins Roundtable on Sustainable Palm Oil  •  Antitrust Regulator in France Fines Major Companies  •  Paradigm Science‚Äôs Cervino Wins Award
Print

Beautifying Facial Lotion with Glycolic Acid



Published July 10, 2013
Post a comment

Phase A
Deionized water
82.65
Protachem NA2 (Protameen) (Disodium EDTA)
0.05
Carbopol Ultrez 30 Polymer (Lubrizol) (Carbomer)
1.00

Phase B
Glycerin, 99.7% USP (Lubrizol)
2.00
Glucam E-20 (Lubrizol) (Methyl Gluceth-20)
1.00

Phase C
Schercemol NGDO Ester (Lubrizol) (Neopentyl glycol tdiethylhexanoate)
5.00
Glucamate SSE-20 Emulsifier (Lubrizol) (PEG-20 methyl glucose sesquistearate)
0.50
Glucate SS Emulsifier (Lubrizol) (Methyl glucose sesquistearate)
0.25
Vitamin E Acetate USP (Essential Ingredients) (Tocopheryl acetate)
0.25
Protachem CS-50 (Protameen) (Cetearyl alcohol)
0.60

Phase D
Sodium hydroxide (18% Solution)
2.70

Phase E
Glycolic acid (67%)
1.50

Phase F
Euxyl PE 9010 (schulke & mayr) (Phenoxyethanol (and) ethylhexylglycerin)
0.50
Diffuporine (Lipotec) (Butylene glycol, water, acetyl thexapeptide-37)
2.00

Procedure
Dissolve Disodium EDTA in water. When Disodium EDTA is fully dissolved, set mixing speed at 400-500 rpm and slowly disperse Carbopol Ultrez 30 polymer into water. Continue mixing until polymer is fully hydrated. Add phase C ingredients to phase A with continued mixing. When uniform, begin heating to 60-65C. Combine phase C ingredients and heat to 60-65C. Mix until uniform and add to phase A/B. Continue mixing until uniform. Add phase D to batch. Increase mixing speed as needed to maintain a good vortex. Remove from heat. Begin cooling to room temperature. When batch is at or near room temperature, add phase E. Reduce mixing speed as needed to reduce any splashing along sides of vessel. Add phase F ingredients individually with good mixing. Q.S. any water loss during heating.

Properties
Appearance-White, shiny lotion; pH - 4.0-4.5; Viscosity (mPau00e2u0080u00a2 s) Brookfield RV, DVII+ Viscometer spindle #4 @ 20 rpm, 25C @ 24 hours - 4,000-7,000; Yield Value (dyn/cmu2) 900-1,000; Stability -Passed 2 months at RT, 45C and 50C. Passed 4 F/T cycles; Recommended Packaging - PVC cylinder round 1 oz., 20/410. Pump: 200mcl, 20/410 smooth clear.

More Information
Lubrizol Advanced Materials 800-379-5389 www.lubrizol.com/personalcare


blog comments powered by Disqus