Welcome Guest to Happi

Subscribe Free: Magazine | eNewsletter

current issue November 2015
 •  The Laundress Opens Flagship Store  •  New Anti-Aging Active at Silab  •  Innospec Attains Cosmetic GMP Certification  •  Herbalife Clears Another Legal Hurdle  •  Mary Kay Picks Location for New R&D Center

Face Mask Treatment

Released by Coast Southwest, Inc.
Published November 5, 2013
Post a comment

Phase A
Deionized water
Dissolvine 220-S (Coast Southwest, Akzo Nobel Functional Chemicals LLC) (Tetrasodium EDTA)
Sorbitol 70% (Sorbitol)
GlyAcid 70 HP (Coast Southwest, CrossChem LP) (Glycolic acid)

Phase B
Ultrastarch P21C (Coast Southwest, Ultra Chemical, Inc.) (Zea mays (corn) starch)
Pelavie Pink Clay (Coast Southwest ) (Bentonite)

Phase C
Hydrasoft Sea (Coast Southwest) (Water (and) algae extract (and) natto gum (and) phenoxyethanol (and) chlorphenesin (and) citric acid)
Creagel Crystal HPB (Coast Southwest) (Hydrogenated polyisobutene (and) ethylene/propylene copolymer)

Phase D
Sharomix 705 (Coast Southwest, Sharon-Laboratories Ltd.) (Benzoic acid (and) sorbic acid (and) dehydroacetic acid (and) benzyl alcohol

Phase E
Endicare ETP-305 (Coast Southwest) (Polyacrylamide (and) C13-14 isoparaffin (and) laureth-7)

Phase A – In main vessel, add phase A, mix and heat to 50°C and hold. Phase B – In side vessel, combine phase B and then slowly add phase B to phase A. Increase speed as needed so powder is wetted out and dispersed; batch will thicken. Phase C – In side vessel, blend phase C together, then add to Phase AB. Once uniform, begin cooling to 40-45°C with slow prop or sweep. Phase D – At 40-45°C, add phase D to phase ABC, continue cooling to 25-30C. Phase E – Add phase E to phase ABCD. Initially, the batch will be discontinuous. Continue mixing and the batch will become uniform. Stop when the batch is thick and homogenous.

pH—3.73; Viscosity—Spindle #5 @ 0.5 rpm = 692,000.

More Information
Coast Southwest, Inc. Tel: 800-621-0500 • Fax: 714-524-8363 Email: info@coastsouthwest.com Website: www.coastsouthwest.com

blog comments powered by Disqus