Welcome Guest to Happi

Subscribe Free: Magazine | eNewsletter

current issue Beauty I&O
 •  11th Beauty Biz Roundtable is Oct. 1  •  Clorox Exits Venezuela  •  Univar Signs Deal With Evonik  •  New App Brings Beauty on Demand  •  Estee Lauder Names Senior Vice President
Print

Bubble Pop—Oil-in-Water BB Gel Mousse with Sunscreen



Released by Dow Corning Corp.
Published April 1, 2014
Post a comment

Phase A
Neo Heliopan AV (Symrise) (Ethylhexyl methoxycinnamate)
5.00
Univul A Plus Granular (BASF) (Diethylamino hydroxybenzoyl hexyl benzoate)
2.00
Neo Heliopan 357 (Symrise) (Butyl methoxydibenzoylmethane)
5.00
Montanox L (Seppic S.A.) (C14-22 alcohols (and) C12-20 alkyl glucoside)
3.00
Arlacel 165 (Croda) (Glyceryl stearate (and) PEG-100 stearate)
0.50
Lanette O (BASF Care Chemicals/Cognis Corp) (Cetearyl alcohol)
1.00
Crodamol GTCC (Croda) (Caprylic/capric triglyceride)
5.00
Crodamol AB (Croda) (C12-15 Alkyl benzoate)
5.00
Dow Corning 556 Fluid (Phenyl trimethicone)
3.00
Dow Corning SW-8005 C30 Resin Wax (C30-45 alkyldimethylsilyl polypropylsilsesquioxane)
2.00

Phase B
Water
q.s.
Keltrol CG-SFT (CP Kelco) (Xanthan gum)
0.05
Glycerin
10.00
Dissolvine NA2-P (Akzo Nobel Chemicals) (Disodium EDTA)
0.10

Phase C
Suncroma C47-060 (Sun Chemical Corp) (Titanium dioxide)
9.50
Suncroma C33-8073 (Sun Chemical Corp) (Iron oxides)
1.20
Suncroma C33-5000 (Sun Chemical Corp) (Black iron oxide)
0.05
Suncroma C33-128 (Sun Chemical Corp) (Iron oxide)
0.40

Phase D
Parfum
0.20
Dow Corning PF-9510 Elastomer Suspension (Dimethicone/vinyl dimethicone crosspolymer (and) C12-14 pareth-12)
3.00
Euxyl PE 9010 (Schülke & Mayr) (Phenoxyethanol (and) ethylhexylglycerin)
0.50

Procedure
Combine phase A ingredients in order with mixing (~400 rpm) and heating to 75°C. Combine phase B ingredients in order with mixing (~400 rpm) and heating to 75°C. Remove from heat and add phase B to phase A while mixing at 700 rpm. Grind pigments from phase C until homogeneous. Add phase C to AB while mixing. When temperature is below 40°C, add ingredients of phase D. Mix at 2,000 rpm for 5 to 10 minutes. Pass through high sheer homogenizer for 30 seconds.

More Information
Dow Corning Corporation 989-496-6000 • Fax: 989-496-5508 www.dowcorning.com/content/personal/


blog comments powered by Disqus