04.01.14
Phase A | |
Neo Heliopan AV (Symrise) (Ethylhexyl methoxycinnamate) | 5.00 |
Univul A Plus Granular (BASF) (Diethylamino hydroxybenzoyl hexyl benzoate) | 2.00 |
Neo Heliopan 357 (Symrise) (Butyl methoxydibenzoylmethane) | 5.00 |
Montanox L (Seppic S.A.) (C14-22 alcohols (and) C12-20 alkyl glucoside) | 3.00 |
Arlacel 165 (Croda) (Glyceryl stearate (and) PEG-100 stearate) | 0.50 |
Lanette O (BASF Care Chemicals/Cognis Corp) (Cetearyl alcohol) | 1.00 |
Crodamol GTCC (Croda) (Caprylic/capric triglyceride) | 5.00 |
Crodamol AB (Croda) (C12-15 Alkyl benzoate) | 5.00 |
Dow Corning 556 Fluid (Phenyl trimethicone) | 3.00 |
Dow Corning SW-8005 C30 Resin Wax (C30-45 alkyldimethylsilyl polypropylsilsesquioxane) | 2.00 |
Phase B | |
Water | q.s. |
Keltrol CG-SFT (CP Kelco) (Xanthan gum) | 0.05 |
Glycerin | 10.00 |
Dissolvine NA2-P (Akzo Nobel Chemicals) (Disodium EDTA) | 0.10 |
Phase C | |
Suncroma C47-060 (Sun Chemical Corp) (Titanium dioxide) | 9.50 |
Suncroma C33-8073 (Sun Chemical Corp) (Iron oxides) | 1.20 |
Suncroma C33-5000 (Sun Chemical Corp) (Black iron oxide) | 0.05 |
Suncroma C33-128 (Sun Chemical Corp) (Iron oxide) | 0.40 |
Phase D | |
Parfum | 0.20 |
Dow Corning PF-9510 Elastomer Suspension (Dimethicone/vinyl dimethicone crosspolymer (and) C12-14 pareth-12) | 3.00 |
Euxyl PE 9010 (Schülke & Mayr) (Phenoxyethanol (and) ethylhexylglycerin) | 0.50 |
Procedure | |
Combine phase A ingredients in order with mixing (~400 rpm) and heating to 75°C. Combine phase B ingredients in order with mixing (~400 rpm) and heating to 75°C. Remove from heat and add phase B to phase A while mixing at 700 rpm. Grind pigments from phase C until homogeneous. Add phase C to AB while mixing. When temperature is below 40°C, add ingredients of phase D. Mix at 2,000 rpm for 5 to 10 minutes. Pass through high sheer homogenizer for 30 seconds. | |
More Information | |
Dow Corning Corporation 989-496-6000 • Fax: 989-496-5508 www.dowcorning.com/content/personal/ |