Welcome Guest to Happi

Subscribe Free: Magazine | eNewsletter

current issue December 2014
 •  Charlotte Tilbury Channels Hollywood  •  Croda Reveals Findings on Volarest FL  •  Lubrizol Joins Roundtable on Sustainable Palm Oil  •  Antitrust Regulator in France Fines Major Companies  •  Paradigm Science’s Cervino Wins Award
Print

Volumizer Wrinkle Filler with linefill



Published May 2, 2014
Post a comment

Phase A
Water, deionized
71.17
Polyacrylate Crosspolymer-11
0.80
Water, Tetrasodium Glutamate Diacetate, Sodium Hydroxide
0.20
Pentylene Glycol
2.00
Mango Eco
2.50

Phase B
Triisostearin
2.00
Caprylic/Capric Tryglyceride
5.00
linefill
2.00
Glyceryl Stearate Citrate
2.50
Palmitoyl Proline, Magnesium Palmitoyl Glutamate, Sodium Palmitoyl Sarcosinate
2.00
Glyceryl Caprylate, Glyceryl Undecylenate
0.50

Phase C
Sodium Hydroxide (10%)
2.20

Phase D
Sodium Polyacrylate, HEC, Ethylhexyl Stearate, Trideceth 6
2.00

Phase E
HDI/Trimethylol Hexyllactone Crosspolymer, Silica
5.00
Fragrance
0.13

Procedure
Heat components of Phase A and Phase B separately to 70-75°C with mixing. Continue mixing until uniform. Remove from heat. With high shear mixing, emulsify Phase B into Phase A. Within the first 5 minutes of emulsifying Phase B into Phase A, slowly add Phase C to batch. Viscosity will decrease. Lower mixing speed to accommodate and continue emulsifying process. Continue mixing for up to 10 minutes. With gentle agitation, add Phase D to batch. Continue mixing up to 20 minutes until desired viscosity is achieved. When the batch has cooled to <40°C, add Phase E components individually with continued gentle agitation.

More Information
Centerchem 20 Glover Ave, Norwalk, CT 06850 Phone: 203.822.9800 Fax: 203.822.9820 www.centerchem.com cosmetics@centerchem.com


blog comments powered by Disqus