Welcome Guest to Happi

Subscribe Free: Magazine | eNewsletter

current issue September 2014
 •  Fashion Week: News You Need to Know  •  The Latest Launch from Lipo  •  Birchbox Partners With AmEx on 'Online's Day Off'  •  Innospec Adds On to Surfactants  •  Bed, Bath & Beyond Picks Up Whip-it Cleaner
Print

Creamy Long Wear Lipstick



Published August 1, 2014
Post a comment

Phase A
Jarcol I-20CG (Jarchem) (Octyldodecanol)
18.00
Octyldodecyl Olivate (Sandream) (Octyldodecyl oleate)
14.15
Jeechem CTG (Jeen) (Caprylic/capric triglyceride)
10.00
Floraesters 15 (Floratech) (Jojoba Esters)
10.00
SP-170 (Strahl & Pitsch) (Paraffin/synthetic blend wax)
8.50
Jeenate 5H (Jeen) (Polyethylene)
5.50
Squalane, vegetable premium (Worlée) (Squalane, vegetable)
5.00
Vitamin E (Sandream) (Tocopheryl acetate)
1.25
SD Duo-Bright-C (Sandream) (Ethyl ascorbic acid)
0.50
Propyl Paraben (Sandream) (Propyl 4-hydroxybenzoate)
0.10

Phase B
Ecoperse Red 7 36% (Sandream) (D&C Red 7 Ca Lake, octyldodecyl oleate)
8.00
Ecoperse Red 6 53% (Sandream) (D&C Red 6 Ba Lake, octyldodecyl oleate)
7.00

Phase C
Sansil 200S (Sandream) (Dimethicone (6cst)/dimethicone/vinyl dimethicone crosspolymer)
8.00
Permethyl 99A (Presperse) (Isododecane)
4.00

Procedure
Weigh phase A into beaker and heat to 80°C under continuous propeller mixing until a clear, homogeneous solution is present. Add phase B, color phase, to phase A and mix until uniform, maintaining heat at 80°C. After solution is well mixed, lower heat to 65°C. Premix phase C solution at room temperature and add to phase A and B. Mix under moderate speed keeping the beaker covered to minimize loss. Pour into lipstick mold after solution is completely uniform. Let mixture set up at room temperature and then transfer to freezer, 0°C, for 10 minutes to enable easy release from molds.

More Information
Sandream Enterprises, LLC 973-822-3077 •  Fax: 973-882-3088 Website: www.sandreamllc.com


blog comments powered by Disqus