01.06.15
Phase A | |
Deionized water | 61.15 |
Glycerin (99.7% FCC Grade) (Archer Daniels Midland) | 7.00 |
1,3-Butanediol (Alfa Aesar) (Butylene glycol) | 4.00 |
Propylene Glycol (Sigma-Aldrich) | 2.00 |
Euxyl PE 9010 (Schülke & Mayr) (Phenoxyethanol (and) ethylhexylglycerin) | 0.80 |
Structure CEL 4400 E rheology modifier (AkzoNobel Personal Care) (Hydroxyethyl ethylcellulose) | 0.15 |
Phase B | |
Arlacel 165 (Croda Inc) (Glyceryl stearate (and) PEG-100 stearate) | 2.00 |
Lipovol A (Lipo Chemicals) (Persea gratissima (avocado) oil) | 3.00 |
Dermol IPM (Alzo Inc) (Isopropyl myristate) | 5.00 |
Floramac Macadamia Oil - Refined (Floratech) (Macadamia integrifolia seed oil) | 3.00 |
Dow Corn 200 Fluid (5 CST) (Dow Corning) (Dimethicone) | 1.00 |
Lipovol Sun (Lipo Chemicals) (Helianthus annuus (sunflower) seed oil) | 3.00 |
Phase C | |
Carbopol 940 (Lubrizol Advanced Material) (Carbomer) | 0.20 |
Phase D | |
Triethanolamine-99% (Dow Chemical) | 0.30 |
Deionized water | 1.00 |
Phase E | |
Dermacryl E (45% active) polymer (AkzoNobel Personal Care) (Styrene/acrylates copolymer) | 4.40 |
Phase F | |
Dry-Flo PC starch (AkzoNobel Personal Care) (Aluminum starch octenylsuccinate) | 2.00 |
Procedure | |
Phase A: In the main kettle, add everything but the Structure CEL 4400 E rheology modifier and mix under the homogenizer while heating to 75-80°C. Sprinkle in the Structure CEL 4400 E rheology modifier under moderate speed to ensure uniform hydration. Phase B: In a side kettle, add all ingredients and heat to 75-80°C under moderate propeller mixing. Once Phase A and B reach temperatures within 5 degrees of each other, add Phase B into A slowly with moderate speed homogenization. Mix for 10 minutes at 75-80°C. Then begin cooling the batch to 60°C, under low homogenization. When the batch has reached 60°C, sprinkle in Carbopol 940 and homogenize at 4000 rpm for 10 minutes until hydrated. Pre-mix Phase D and slowly add to the batch. Homogenize for 5 minutes or until homogeneous. Add Phase E and mix for another 5 minutes or until homogeneous. Cool batch to 45°C. At 45°C, sprinkle in Phase F and homogenize into the batch at low speed for 10 minutes or until uniform. Adjust the pH to 6.9-7.4. Switch the batch to a sweep blade at the lowest mixing speed (~ 20 rpm) and cool completely to room temperature. Drop the batch. | |
Properties | |
Color—White; Appearance—Opaque; pH—6.8-7.4; Viscosity—4400-10700 cps RVDV Spindle C, 10 rpm, 25°C. | |
More Information | |
AkzoNobel Surface Chemistry Personal Care 888-331-6212 Fax: 908-707-3664 Email: personalcare.usa@akzonobel.com Website: www.akzonobel.com/PersonalCare |