03.04.15
Phase A | |
Water | 60.00 |
Ashland 980 carbomer | 0.30 |
LiquPar MEP Preservative (Ashland) (Phenoxyethanol (and methylparaben (and) ethylparaben (and) propylparaben) | 1.00 |
Phase B | |
Escalol HMS UV filter (Ashland) (Homosalate) | 10.00 |
Escalol 517 UV filter (Ashland) (Butyl methoxydibenzoylmethane) | 3.00 |
Escalol 567 UV filter (Ashland) (Benzophenone-3) | 6.00 |
Escalol 597 UV filter (Ashland) (Octocrylene) | 7.00 |
ProLipid 141 lamellar gel (Ashland) (Glycerul stearate (and) behenyl alcohol (and) palmitic acid (and) stearic acid (and lecithin (and) lauryl alocohol (and) myristyl alcohol (and) cetyl alcohol) | 4.00 |
Ceraphyl 230 ester (Ashland) (Diisopropyl adipate) | 5.00 |
Cetereath-20 | 0.05 |
Phase C | |
Water | 3.00 |
Triethanolamine | 0.15 |
Phase D | |
Dow Corning EL 9240 Silicone Elastomer Blend (Dow Corning)(Dimethicone (and) dimethicone crosspolymer) | 0.30 |
Phase E | |
Optiphen MIT Ultra preservatives (Ashland) (Phenyl- propanol (and) propylene glycol (and) methylisothalinone) | 0.20 |
Procedure | |
Add water to the main beaker. Begin homo-mixing. Heat to 70-75°C. Sprinkle carbomer into water. Mix until hydrated. Maintain temperature and add preservative. In side beaker, add ingredients of B. Heat to 70-75°C with mixing. Add B to A with homogenization. Premix C in side beaker and add to main beaker at 60-65°C. Add D to main beaker with mixing at 50-55°C. Add E to main beaker with mixing at 40-45°C. Switch to sweep blade and cool to room temperature. | |
Properties | |
Appearance—smooth, white cream; pH—5.00-5.50; Viscosity—Brookfield RVT/Spindle TC/5 rpm/1 minute/25°C: 80,000-90,000 cps. | |
More Information | |
Ashland Specialty Ingredients 800-505-8984 Email: personalcare@ashland.com Website: Ashland.com/personalcare |