04.01.15
Phase A | |
Deionized water | 66.20 |
Disodium EDTA (Ruger Chemical) (Disodium EDTA) | 0.05 |
Glycerin (Ruger Chemical) | 1.00 |
Butylene glycol (Ruger Chemical) | 1.00 |
Xanthan gum | 0.25 |
Sodium chloride | 0.75 |
Phase B | |
Lipomulse 165 (Lipo Chemicals, Inc) (Glyceryl stearate (and) PEG-100 stearate) | 2.75 |
Microcrystalline Wax (Ruger Chemical) (Microcrystalline wax) | 1.00 |
Lipo Stearic Acid (Lipo Chemicals, Inc) (Stearic acid) | 1.50 |
Iso Jojoba 35 (Lipo Chemicals - Desert Whale Jojoba) (Simmondsia chinensis (jojoba) butter) | 3.00 |
Liponate GC (Lipo Chemicals, Inc) (Caprylic/capric triglyceride) | 8.00 |
Lipocol SC (Lipo Chemicals, Inc) (Cetearyl alcohol) | 1.00 |
Shin-Etsu DM Fluid 350cs (Shin-Etsu) (Dimethicone) | 1.00 |
Lipovol MOS-70 (Lipo Chemicals, Inc) (Tridecyl stearate (and) neopentyl glycol dicaprylate/dicaprate (and) tridecyl Trimellitate) | 5.00 |
Liposorb S (Lipo Chemicals, Inc) (Sorbitan stearate) | 3.50 |
Phase C | |
LipoLight OAP/PVA (Lipo Chemicals, Inc) (Nylon-12 fluorescent brightener 230 salt (and) polyvinylalcohol crosspolymer) | 2.00 |
Orgasol Restore (Lipo (Arkema)) (Nylon 6/12 (and) oIive glycerides (and) ceramide 3 | 2.00 |
Phase D | |
Preservative | q.s. |
Procedure | |
In main vessel combine the water, disodium EDTA and mix with medium speed propeller agitation while. Prepare a slurry of glycerin, butylene glycol, and xanthan gum, add to main vessel, continue mixing and begin heating to 80˚C, hold at temperature for 30 minutes. In a side kettle, combine phase B ingredients and heat to 80˚C. Mix until uniform. Slowly add phase B to phase A and mix with medium propeller agitation for 15 minute, begin cooling. Slowly add phase C to main vessel continue mixing, continue cooling. Add remaining phase D while mixing. Shutdown when batch reaches 32˚C. | |
Properties | |
pH—NA; Viscosity—T-F Helipath @ 3rpm + 105,000 cps ± 10%; Stability—1 month @ 50°C. | |
More Information | |
Lipo Chemicals (973) 345-8600 Fax: (973) 345-8365 Website: www.lipochemicals.com |