05.01.15
Phase A | |
Deionized water | 71.94 |
Disodium EDTA (Ruger) (Disodium EDTA) | 0.10 |
Pemulen TR-1 (Lubrizol) (Acrylates/C10-30 alkyl acrylate crosspolymer) | 0.11 |
Liponic EG-1 (Lipo Chemicals) (Glycereth-26) | 1.50 |
Phase B | |
Lipomulse Luxe (Lipo Chemicals) (Cetearyl alcohol (and) glyceryl stearate (and) PEG-40 stearate (and) ceteareth-20) | 6.00 |
Liponate TDTM (Lipo Chemicals) (Tridecyl trimellitate) | 1.00 |
Silkflo 364 (Lipo/Ineos) (Hydrogenated polydecene) | 2.00 |
Liponate NEB (Lipo Chemicals) (C12-15 alkyl benzoate) | 2.50 |
Shin-Etsu KSG-16 (Shin-Etsu) (Dimethicone/vinyl dimethicone crosspolymer) | 5.00 |
Liponate NPGC-2 (Lipo Chemicals) (Neopentyl Glycol Dicaprylate/dicaprate) | 5.50 |
Vitamin E Acetate (Ruger) (Tocopheryl acetate) | 0.10 |
Phase C | |
Sodium Hydroxide Solution 18% (Ruger) (Sodium hydroxide) | 0.25 |
Phase D | |
Hylasome EG10 (Lipo/Hylamed) (Sodium hyaluronate crosspolymer) | 2.00 |
Phase E | |
Orgasol 4000 EXD NAT COS Caresse (Lipo/Arkema) (Nylon 6/12) | 2.00 |
Phase F | |
Preservative | q.s. |
Procedure | |
Combine the water, disodium EDTA and Pemulen TR-1 and mix with high speed propeller agitation while heating to 80°C. When Pemulen is dispersed add remaining sequence #1 ingredients, continue mixing and heating. In a side kettle, combine, sequence #2 ingredients and heat to 80°C. Mix until uniform. Slowly add sequence #2 to sequence #1 and mix with medium propeller agitation for 15 minutes until emulsification is complete. Slowly add sequence #3 to main vessel continue mixing,s tart cooling. Cool batch to 55°C with mixing and slowly add seuqnce #4 then sequence #5. Begin cooling batch further with mixing. Add remaining seuqnce #6 while mixing. Shutdown when batch reaches 32°C. | |
Properties | |
pH—6.75; Viscosity—T-F Helipath @ 3rpm—70,000 cps ± 10%; Stability—1 month at 50°C . | |
More Information | |
Lipo Chemicals 973-345-8600 Fax: 973-345-8365 Website: www.lipochemicals.com |