02.03.16
Phase A | |
Water | q.s. 100 |
Propanediol | 10.00 |
Glycerin | 7.00 |
Disodium EDTA | 0.20 |
Potassium sorbate | 0.10 |
Phase A-1 | |
Carbopol Ultrez 21 polymer | 0.70 |
Phase A-2 | |
Xathan gum | 0.10 |
Phase B | |
Meadowfoam (Limnanthes alba) seed oil | 5.00 |
Schercemol CATC ester | 2.00 |
Schercemol dis ester | 2.00 |
Lipochroman synthetic molecule | 0.05 |
Tocopheryl acetate | 0.40 |
Phenoxyethanol | 0.40 |
Phase C | |
Dimethicone | 3.00 |
Isododecane, vinyl dimethicone/lauryl dimethicone crosspolymer, lauryl dimethicone, dimethicone | 3.00 |
Phase D | |
Actiguard advanced botanical ingredient | 5.00 |
Antarcticine marine ingredient C | 1.00 |
Phase E | |
Silica, dimethicone | 1.00 |
Phase F | |
Fragrance | 0.20 |
Phase G | |
Sodium hydroxide (20% in aqueous solution) | q.s. |
Procedure | |
In an adequate vessel while mixing, dissolve the propanediol, glycerin, disodium EDTA and potassium sorbate in the water. Add the Carbopol Ultrez 21 polymer under stirring. Add xanthum gum under stirring and heat it at 70-75°C. Mix and melt phase B ingredients at 70-75°C. Add phase B onto phase A under stirring with turbine. Add phase C under stirring. Add phase D under stirring. Add phase E under stirring. Add phase F under stirring. Add phase G to adjust pH to 6.0-6.5. | |
More Information | |
Lipotec 34-93-638-80-00 Email: commercial@lipotec.com Website: www.lipotec.com |