Phase A | |
Water | q.s. to 100 |
LaraCare A200 (Lonza) (Galactoarabinan) | 1.00 |
Adeka Nol GT 730 (IKEDA/ADEKA Corp) (Peg-240/HDI copolymer dis-decyltetradeceth-20 ether & butylene glycol & water & potassium laurate & tocopherol) | 6.00 |
Ultrafine TiO2 (Sensient) (Titanium dioxide) | 5.00 |
GA-7206 Hydrophilic Red Iron Oxide (Color Techniques) (Iron oxides, galactoarabinan) | 0.30 |
GA-7403 Hydrophilic Black Iron Oxide (Color Techniques)(Iron oxides, galactoarabinan) | 0.10 |
GA-7131 Hydrophilic Yellow Iron Oxide (Color Techniques) (Iron Oxides, galactoarabinan) | 1.00 |
Phase B | |
Lonzest DC (Lonza)(Dicaprylyl carbonate) | 5.00 |
Lonzest MSA (Lonza) (Glyceryl stearate & PEG-100 stearate) | 3.00 |
Brookswax D (Lonza)(Cetearyl alcohol & cetearth-20) | 2.50 |
Ethylhexyl methoxycinnamate | 7.50 |
Ethylhexyl salicylate | 4.00 |
Phase C | |
ReGeniStem Brightening (Lonza)(Glycyrhiza glabra (licorice) root extract & prunus armeniaca (apricot) kernel oil) | 2.00 |
Vivillume (Lonza) (Water & strelitzia nicolai seed aril extract) | 1.00 |
Phase D | |
Mikrokill COS (Lonza) (Phenoxyethanol & caprylyl glycol & chlorphenesin) | 0.75 |
Procedure | |
In primary beaker, add water, LaraCare A200, pigments and TiO2 and mix until uniform. Slowly heat to 75°C and add Adeka Nol GT 730, mix until uniform.Combine components of phase B in a separate beaker and slowly heat to 75°C and mix until uniform. With slow mixing in the primary beaker, add phase B to the primary beaker. Mix until uniform. Add components of phase C immediately following phase B and mix until uniform. Add components of phase D immediately following phase C and mix until uniform. | |
Properties | |
pH—6.00-7.00; Viscosity—100,000-150,000 cps (TE Spingle, 10rpm @ RT for 1 min.); Appearance—Tinted gel. | |
More Information | |
Lonza Consumer Care 908-561-5200 Website: www.lonza.com Email: www.lonza.com/personalcare |