09.01.16
Phase A | |
Water | q.s. to 100 |
Pentylene glycol | 3 |
Disodium EDTA | 0.2 |
Potassium sorbate | 0.1 |
Phase A-1 | |
Carbopol Ultrez 10 polymer | 0.1 |
Phase A-2 | |
Pemulen TR-2 polymer | 0.2 |
Phase B | |
Capylic/capric triglyceride | 6 |
Glucate SS (Methyl glucoside derivative) | 2 |
Phenoxyethanol | 0.35 |
Cetyl alcohol | 0.25 |
Stearic acid, palmitic acid | 0.25 |
Schercemol 1818 Ester | 16 |
Glucamate SSE-20 methyl glucoside derivative | 2 |
Phase C | |
Nocturshape blue ingredient (B1080) | 4 |
Lipomoist 2036 molecular film PCEB (P12-Es095) | 5 |
Cyclohexasiloxane, cyclopentasiloxane | 4 |
Phase D | |
Fragrance | 0.1 |
Phase E | |
Sodium hydroxide (20% in aqueous solution) | q.s. |
Procedure | |
Dissolve A in an adequate vessel and stir. Add phase A1 slowly while stirring. Add phase A2 while stirring. Heat to 70-75°C. In a separate vessel mix the component of phase B, heat the mixture to 70-75°C and pour over the previous mixture slowly while stirring. Let the mixture cool down to 50°C and add phase C. Add phase D and stir. Adjust pH to specification with phase E. | |
Properties | |
pH—5.5.-7.0; Viscosity—1600-6400 cPs (5/50). | |
More Information | |
Lipotec Email: commercial@lipotec.com Website: www.lipotec.com |