Phase A | |
Talc J68 (Miyoshi America) (Talc) | 11.11 |
Barium Sulfate HL (Presperse) (Barium sulfate) | 11.50 |
Zinc Stearate (Witco) | 9.70 |
SB-300 (Silica) (Miyoshi America) | 2.30 |
Phase B | |
ACT-96-Y-77492 (Miyoshi America) (ACT treated Iion xides CI 77492) | 1.70 |
ACT-96-Y-77491 (Miyoshi America) (ACT Treated Iron Oxides CI 77491) | 0.04 |
Colorona Syn Cranberry (EMD/Rona) (Synthetic flourophlogopite (and) iron oxides Cl 77491, Cl 77492 & Cl 77499) | 3.10 |
Colorona Syn Cranberry Pink (EMD/Rona) (Synthetic flourophlogopite (and) iron oxides Cl 77491, Cl 77492 & Cl 77499) | 4.25 |
Flamenco Superpearl (BASF) (Mica Cl 77019 (and) titanium dioxide Cl 77891) | 23.00 |
Timica Extra Bright (BASF)(Mica Cl 77019 (and) titanium dioxide Cl 77891) | 17.00 |
Phase C | |
Crodamol STS (Croda) (PPG-3 Benzyl ether myristate) | 6.00 |
Arlamol LST (Croda) (PPG-3 Isostearyl methyl ether) | 5.00 |
Sensasil PCA (Croda) (PCA dimethicone) | 3.80 |
Phenoxetol (Clarinat) (Phenoxyethanol) | 0.50 |
Vegesome Moist 24 (Sederma) (Glycerin (and) lyco-podium clavatum extract (and) imperata cylindrica root extract) | 1.00 |
Procedure | |
Add phase A ingredients to a micropulverizer jar/mason jar. Micropulverize phase A powders for 1-2 minutes. Add phase B ingredients to the batch and micropulverize for an additional 1-2 minutes. Sprinkle phase C ingredients to the batch individually and micropulverize for an additional 1-3 minutes, scraping any unmixed oil/powder off the wall of the jar and continuing to micropulverize for an additional minute until all powders are properly dispersed and uniform. When uniform, press on appropriate componentry of choice (Aluminum/Tin Pans) @ a maximum pressure of 1600psi or 110Barr. | |
Properties | |
Appearance—Pearlescent beige/pressed eyeshadow; Drop Test—3 drops, 12 inches on a hard surface=passed; Pressure—1600psi/110 Barr Max depending on drop test protocol. | |
More Information | |
Croda 732-417-0800 Website: www.croda.com |