Phase A | |
Deionized water | q.s. |
LaraCare A200 (Lonza Consumer Care)(Galactoarabinan) | 2.00 |
Butylene glycol | 1.50 |
Geogard LSA (Lonza Consumer Care) (Butylene glycol (and) benzyl alcohol (and) sorbic acid (and) caprylic/capric triglyceride (and) lauryl alcohol (and) myristyl alcohol) | 1.00 |
Carbopol Ultrez 21 (Lubrizol) (Acrylates/C10-30 alkyl acrylate crosspolymer) | 0.25 |
Carbopol 2050 Polymer (Lubrizol) (Carbomer) | 0.15 |
Phase B | |
Gel Base BSM5 (Lonza Consumer Care) (Cyclomethicone (and) dimethicone (and) phenyl trimethicone) | 3.00 |
Gel Base Sil (Lonza Consumer Care) (Cyclomethicone (and) dimethicone) | 1.00 |
Cetiol CC (BASF) (Dicaprylyl carbonate) | 3.00 |
Natrulon H-6 (Lonza Consumer Care) (Polyglycerin-6) | 0.50 |
Natrulon H-10 (Lonza Consumer Care) (Polyglycerin-10) | 0.50 |
TEA, 99% (Triethanolamine) | 0.30 |
Phase C | |
Deionized water | 5.00 |
Niacinamide USP (Lonza Consumer Care) (Niacinamide) | 0.50 |
Carnipure Crystaline (Lonza Consumer Care) (Carnitine) | 1.00 |
Phase D | |
SD Alcohol 40-B (Grains Processing) (SD Alcohol 40-B) | 2.50 |
Rapithix A-60 (Ashland) (Sodium polyacrylate (and) hydrogenated polydecene (and) trideceth-6) | 1.25 |
Moisture Blast Fragrance 062760 (Chemia Fragrance & Flavor) | 0.20 |
Glycosperse L-20 KFG (Lonza Consumer Care) (Polysorbate 20) | 0.40 |
Procedure | |
Charge water of phase A into main vessel. Add LaraCare A200 active of phase A to the main vessel and begin mixing. Add remaining ingredients of phase A to main vessel in order listed, mixing well between each ingredient addition. Mix until homogenous. Add ingredients of phase B to main vessel in order listed, mixing well between each ingredient addition. Mix until homogeneous. Pre-mix ingredients of phase C in a separate vessel. Mix until a clear solution forms. Add phase C to the main vessel. Mix until homogeneous. Add Rapithix A-60 of phase D to the main vessel. Mix until homogeneous. Slowly add alcohol of phase D to the main vessel. Mix until homogenous. Pre-mix Glycosperse L-20 solubilizer and fragrance of phase D in a separate vessel. Add to the main vessel. Mix until homogeneous. | |
Properties | |
pH—5.0–6.0; Viscosity—20,000-25,000cps Spindle #5 @ 10rpm (25°C after 24 hours); Appearance—White lotion. | |
More Information | |
Lonza Consumer Care 908-561-5200 Website: www.lonza.com |