Phase A | |
Deionized water | 49.85 |
Butylene glycol | 5.00 |
Glycerin | 3.00 |
Sensiva PA40 (schülke and mayr) (Phenylpropanol (and) propanediol (and) caprylyl phenylpropanol (and) propanediol (and) caprylyl) | 0.80 |
Xantham gum | 0.30 |
Avalure Flex-6 Polymer (wt% TS 1.00) (Lubrizol Advanced Materials) (Polyurethane-62 (and) trideceth-6) | 1.00 |
Arlatone MAP 160K (Croda) (Potassium cetyl phosphate) | 2.50 |
Phase B | |
Unipure White LC 981 SGP (Sensient) (Titanium Dioxide (CI77891) (and) sodium glycerophosphate) | 8.35 |
Unipure Yellow LC182 SGP (Sensient) (Iron Oxides (CI 77492) (and) sodium glycerophosphate) | 1.00 |
Unipure Red LC381 SGP (Sensient) (Iron Oxides (CI 77491) (and) sodium glycerophosphate) | 0.35 |
Unipure Black LC989 SGP (Sensient) (Iron Oxides (CI77499) (and) sodium glycerophosphate) | 0.30 |
Phase C | |
Schercemol NGDO Ester (Lubrizol Advanced Materials) (Neopentyl glycol diethylhexanoate) | 15.00 |
Ronaflair Boroneige SF-6 (Boron Nutride) | 3.00 |
Alcohol Denat. | 5.00 |
Symcool WS-23 (Symrise) (Methyl diisopropyl propionamide) | 0.25 |
Argireline Peptide Solution (Lipotec SAU) (Water (and) acetylhexapeptide-8 (and) caprylyl skin conditioning glycol) | 3.00 |
Matmarine Blue Ingredient (Lipotec SAU) (Water (and) pseudoaltermonas ferment extract) | 1.00 |
Fragrance Creative Lovely (Sensient Fragrances) (Fragrance) | 0.30 |
Procedure | |
In an appropriate clean beaker, weigh ingredients #1-4 of part A and heat to 50°C. Sprinkle ingredient #5 to batch with mixing until complete dispersion. Sprinkle ingredient #6 to batch with mixing until complete dispersion avoiding air trapping, max speed 500 rpm then raise the temperature to 60°C. Sprinkle ingredient #7 to batch until complete dispersion. Add one at a time part B ingredients to part A under homogenizer at 5000 rpm for 15 minutes. In a separate beaker weigh part C and heat it to 70°C. Add slowly part C to part A/B at 70°C stirring at 800 rpm and homogenize for 1 minute at 10,000 rpm. Let it cool down with mixing 500 rpm to 30°C for adding one by one the ingredients of part D to batch. | |
Properties | |
Appearance—Fluid creamy beige emulsion; pH—6.5-7.0; Viscosity (mPa•s) Brookfield® DV-1 Viscometer (Brookfield AMETEK, Inc.) spindle #5 @ 20 rpm, 25°C @ 24 hours—11,000-15,000; Yield Value (dyn/cm2)—150-650; Stability—Passed 1 month @ 50°C, 3 months @ 40°C, 4°C, and 25°C and 5 freeze/thaw cycles (-18°C/25°C). AvalureT Flex-6 Polymer (wt% TS) 1.00. | |
More Information | |
Lubrizol Advanced Materials 800-379-5389, 216-447-5000 Website: ww.lubrizol.com/personalcare |