Phase A | |
Deionized water | 62.597 |
Dissolvine NA2-S (Coast Southwest, Akzo Nobel Functional Chemicals) (Disodium EDTA) | 0.100 |
Glycerin 99.7% USP Kosher (Coast Southwest, Inc.) | 3.000 |
X50 Pure White CC Powder (Coast Southwest, Inc and Infinitec Barcelona) (Glycolic acid (and) lactic acid (and) polyvinyl alcohol) | 0.003 |
Phase B | |
Endimate 33V (Coast Southwest, Inc.) (Caprylic/capric triglyceride) | 4.000 |
Baobab Oil (Coast Southwest, ICSC International Cosmetic Science Centre) (Adansonia digitata seed oil) | 1.000 |
Endicare TN (Coast Southwest, Inc.) (C12-15 Alkyl Benzoate) | 1.200 |
Endicare OMC (Coast Southwest, Inc.) (Ethylhexyl Methoxycinnamate) | 3.500 |
Endicare OTX (Coast Southwest, Inc.) (Octocrylene) | 2.000 |
Phase C | |
Endimulse 165V (Coast Southwest, Inc.) (Glyceryl stearate (and) PEG-100 stearate) | 4.000 |
Endimulse EGDS (Coast Southwest, Inc.) (Glycol distearate) | 3.000 |
Cetyl Alcohol (Coast Southwest, Inc.) (Cetyl alcohol) | 1.000 |
Phase D | |
Endicare AB (Coast Southwest, Inc.) (Butyl Methoxydibenzoylmethane) | 3.000 |
Uvasorb MET (Coast Southwest, Inc., 3V Sigma-USA) (Benzophenone-3) | 3.000 |
Phase E | |
Luxscreen TR14 AF 50 (Coast Southwest, Inc., The Innovation Company) (Titanium dioxide and hydrogenated polydecene (and) styrene/acrylates copolymer) | 5.000 |
Luxscreen Zn40 AF 50 (Coast Southwest, Inc., The Innovation Company) (Zinc oxide (and) hydrogenated polydecene (and) styrene/ acrylates copolymer) | 2.000 |
Phase F | |
Sharomix 713 (Coast Southwest, Inc., Sharon-Laboratories, Ltd.) (Sodium benzoate (and) potassium sorbate (and) aqua) | 0.800 |
Ultrapure Polymer 2055 (Coast Southwest, Inc.,Ultra Chemical, Inc.) (Polyvinyl acetate (and) aqua) | 0.800 |
Procedure | |
Phase A—In main vessel, add phase A and begin propeller mixing at 200-300 rpm. Heat to 75-80°C. Phase B—In separate vessel, add phase B ingredients with propeller mixing and begin heating to 40-45°C. Phase C—At 40-45°C, add phase C ingredients to phase B and bring heat up to 65-70°C. Phase D—At 65-70°C, add phase D ingredient to phase BC. Note: Allot time for powders to dissolve; solution will become yellow. When both phases have reached 75-80°C, add phase BCD to phase A slowly under a homogenizer at 2,400 rpm while maintaining the temperature during emulsification. Homogenize for 1 minute. Once the solution is uniform, switch back to propeller mixing, discontinue heat and begin cooling to 30-35°C. Phase E—At 35°C, add phase E to phase ABCD. Increase speed as needed to mix the two phases together until fully uniform. Phase F—Add phase F to phase ABCDE with propeller mixing. Once uniform, transfer to a homogenizer and homogenize at 2,000 rpm and homogenize for <30 seconds. Once complete, transfer to a holding vessel. | |
Properties | |
pH—n/a; Viscosity: spindle 6 @ 12 rpm = 23,330 cst. | |
More Information | |
Coast Southwest, Inc. 800-621-0500 Email: info@coastsouthwest.com Website: www.coastsouthwest.com |