Phase A-1 | |
KSG-710 (Dimethicone (&) dimethicone/polyglycerin-3 crosspolymer) | 4.00 |
USG-105 (Methyl trimethicone (&) dimethicone/vinyl dimethicone crosspolymer ) | 1.00 |
KF-6104 (Polyglyceryl-3 polydimethylsiloxyethyl dimethicone) | 1.20 |
Phase A-2 | |
DMF-A6CS (Dimethicone) | 3.00 |
TMF-1.5 (Methyl trimethicone) | 7.00 |
Phase B | |
1,3-Butylene glycol | 5.00 |
Glycerin | 10.00 |
Sodium citrate | 0.20 |
Sodium chloride | 0.50 |
Phenoxyethanol | 1.00 |
Water | 59.10 |
Phase C | |
TMF-1.5 | 5.00 |
TSPL-30-TMF* (Methyl trimethicone (&) trimethylsiloxysilylcarbamoyl pullulan) | 3.00 |
Procedure | |
Combine Phase A1 and start to mix using a dispersing blade. 2. While mixing add Phase A2 to Phase A1 and mix until smooth and uniform. 3. In a separate vessel combine Phase B and mix well. 4. Emulsify by adding Phase B to Phase A under low shear (700-900 rpm) for ~1-2 minutes and then increase speed to ~1,800 rpm for 5 minutes. 5. In a separate vessel mix Phase C until well blended then add to Phase A+B and mix until well blended. *Note: For easy addition pre-dilute TSPL-30-TMF in a portion of the base oil and add post emulsion | |
Properties | |
Appearance-White gel cream;Viscosity (24hr)—Brookfield Heliopath RV Spindle TC, Speed 5, 1 min @ 25°C = 69,400 CPS; Stability—Room Temperature/2 Months Stable, 50°C/1 Month Stable Freeze/Thaw-3 cycles (-20°C/RT), Stable. | |
More Information | |
Shin-Etsu Silicones of America, Inc. 201-261-9500 Website: www.shinetsusilicones.com |