09.01.06
Phase A | |
Deionized water | 51.52 |
SoftCAT SK-MH (Polyquaternium-67) (2% solution) | 10.00 |
Phase B | |
Cocamidopropyl betaine (35% active) | 3.60 |
Decyl glucoside (50% active) | 5.13 |
Sodium laureth sulfate (26% active) | 27.90 |
Cocamide MEA (100% active) | 0.90 |
PEG-120 methyl glucose dioleate | 0.20 |
Triclosan | 0.10 |
DMDM hydantoin | 0.40 |
Sodium chloride | 0.25 |
Citric acid | q.s. |
Fragrance | q.s. |
Procedure | |
Prepare a 2% solution of SoftCAT SK-MH by sprinkling it into agitating, room temperature water. Allow to disperse completely before beginning to heat slowly, with mixing, to 60-65˚C. Solution should be crystal clear. Mix phase A in a beaker while heating to 50-55˚C. In a separate container, mix the ingredients of phase B minus the sodium chloride and the DMDM hydantoin, while heating to 50-55˚C to dissolve the cocamide MEA, PEG-120 methyl glucose dioleate and triclosan. Continue mixing until uniform. At 50-55˚C, add the contents of phase A to phase B. Continue mixing until uniform and begin to cool. At 40˚C, add sodium chloride, DMDM hydantoin and fragrance. While mixing, continue to cool to room temperature. Adjust pH to desired level using appropriate acid or base. | |
More Information | |
Amerchol Corporation, a subsidiary of Dow Chemical Tel: (800) 367-3534; Fax: (989) 832-1465; Website: www.amerchol.com |