Phase A | |
Deionized Water | 72.50 |
Natrulon H-6 (Polyglycerin-6) (Lonza Consumer Care) | 3.00 |
Disodium EDTA | 0.10 |
LaraCare A200 (Galactoarabinan) (Lonza Consumer Care) | 2.00 |
Novertix L-10 (Acrylates/Beheneth-25 Methacrylate Copolymer) (Lubrizol) | 3.00 |
Phase B | |
Cetiol CC (Dicaprylyl Carbonate) (BASF) | 10.00 |
Polyaldo 10-2-P Pastillated (Polyglyceryl-10 Dipalmitate) (Lonza Consumer Care) | 2.31 |
Polyaldo 6-2-S (Polyglyceryl-6 Distearate) (Lonza Consumer Care) | 0.09 |
Cetearyl Alcohol (Cedar Concepts) | 2.00 |
Phase C | |
Sodium Hydroxide, 25% | q.s. |
Phase D | |
SD Alcohol 40-B (Grain Processing) | 3.00 |
Menthol | 0.20 |
Phase E | |
Geogard ECT (Benzyl Alcohol (and) Glycerin (and) Salicylic Acid (and) Sorbic Acid) (Lonza Consumer Care) | 1.00 |
Phase F | |
Cherry & Almond Fragrance (Chemia Fragrance (and) Flavor) | 0.40 |
Glycosperse L-20 KFG (Polysorbate 20) (Lonza Consumer Care) | 0.20 |
Phase G | |
D&C Red 33 0.1% Solution (D&C Red 33) (Sensient) | q.s. |
Procedure | |
1. In a separate vessel, add ingredients of Phase A and heat to 75°C. 2. In the main vessel, add ingredients of Phase B and heat to 75°C. 3. Add ingredients of Phase A to the main vessel with mixing. Mix for 15 minutes or until homogenous. 4. Remove main vessel from heat. 5. Adjust the pH of the main vessel to 7.00 with Phase C (sodium hy- droxide solution, 25%) 6. In a separate vessel, premix ingredients of Phase D. When main vessel is at 45°C, add Phase D to the main vessel with mixing. Mix until homogenous. 7. Add Phase E to the main vessel with mixing. Mix until homogenous. 8. In a separate vessel, premix ingredients of Phase F. Add Phase F to the main vessel with mixing. Mix until homogenous. 9. Add Phase G with mixing. Mix until homogenous. 10. Check the pH of the main vessel. If necessary, adjust the pH to 7.00 with sodium hydroxide solution, 25%. | |
Properties | |
pH:6.5–7.5 • Viscosity: 75,000 – 125,000cps Spindle TE @ 10rpm (25°C after 24 hours) • Appearance: Pink thick lotion |