Formulary

Jump Start the Day Gel Primer

Released by Lonza Consumer Care

Released by Lonza Consumer Health 05.31.17

Phase A
Deionized Water	q.s. Lonza Consumer Care 0.20 – 1.00 – 0.50 Lubrizol 0.55 Lonza Consumer Care 0.50 Lonza Consumer Care 0.50 BASF 2.00 Lonza Consumer Care 1.00 – 1.10 – 5.00 Lonza Consumer Care 0.50 Lonza Consumer Care 1.00 Lonza Consumer Care 2.00
SeaPure Agarose (Agarose) (Lonza Consumer Care)	0.20
Glycerin	1.00
Butylene Glycol	0.50
Carbopol 2050 (Carbomer) (Lubrizol)	0.55
Phase B
Natrulon H-6 (Polyglycerin-6) (Lonza Consumer Care)	0.50
Natrulon H-10 (Polyglycerin-10) (Lonza Consumer Care)	0.50
Cetiol CC (Dicaprylyl Carbonate) (BASF)	2.00
Marula Oil (Sclerocarya Birrea Seed Oil) (Lonza Consumer Care)	1.00
TEA, 99% (Triethanolamine)	1.10
Phase C
Deionized Water	5.00
Niacinamide USP (Niacinamide) (Lonza Consumer Care)	0.50
Carnipure Crystalline (Carnitine) (Lonza Consumer Care)	1.00
LaraCare A200 (Galactoarabinan) (Lonza Consumer Care)	2.00
Phase D
Mikrokill COS (Phenoxyethanol (and) Caprylyl Glycol (and) Chlorphenesin) (Lonza Consumer Care)	0.75
D&C Green 5, 0.2% solution (D&C Green 5) (Sensient)	0.20
Water Sleep Time Mask Type 61434 (Fragrance) (Chemia Fragrance & Flavor)	0.20
Properties
pH: 6.5–7.5. • Viscosity: 40,000–50,000cps Spindle TE @ 10rpm (25°C after 24 hours) • Appearance: Light blue lotion
Procedure
1. Charge water of Phase A into main vessel and heat to 85°C. Add glycerin and butylene glycol of Phase A to main vessel. 2. Sprinkle SeaPure Agarose rheology modifier of Phase A to main vessel. Hold temperature and mix well for 30 minutes. 3. Add Carbopol of Phase A to main vessel and allow to mix for 10 minutes. 4. Add ingredients of Phase B (except for TEA) to main vessel. Remove from heat and mix well for 15 minutes. 5. Add TEA from Phase B to main vessel. Mix well until homogeneous. 6. Pre mix ingredients of Phase C in a separate vessel. Mix until clear solution forms. 7. When main vessel has reached ~40°C, slowly add Phase C. Mix until homogeneous. 8. Add ingredients of Phase D into main vessel. Cool to room temperature.