Phase A | |
Cetiol C5 (BASF) (Coco-caprylate) | 5.0 |
Myritol 331 (BASF) Cocoglycerides | 5.0 |
Cetiol J600 (BASF) (Oleyl erucate) | 5.0 |
NAID-TRI-77891(US Cosmetics) (Titanium dioxide, disodium stearoyl glutamate, alumnium hydroxide) | 7.0 |
NAID-B-77499 (US Cosmetics) (Iron oxides, disodium stearoyl glutamate, alumnium hydroxide) | 0.1 |
NAID-Y-77492 (US Cosmetics) (Iron oxides, disodium stearoyl glutamate, alumnium hydroxide) | 0.7 |
NAID-R-77491 (US Cosmetics) (Iron oxides, disodium stearoyl glutamate, alumnium hydroxide) | 0.3 |
Cutina PES (BASF) (Pentaerythrityl distearate) | 2.0 |
Veegum Ultra (R.T. Vanderbilt)(Magnesium aluminum silicate) | 0.5 |
Water | 61.4 |
Glycerin | 3.0 |
Plantapon LGC Sorb (BASF) (Sodium lauryl glucose carboxylate (and) lauryl glucoside) | 1.5 |
Phase B | |
Dehymuls PGPH (BASF) (Polyglyceryl-2 dipolyhydroxystearate) | 4.0 |
Phase C | |
Vanzan (R.T. Vanderbilt) (Xanthan gum) | 0.5 |
Phase D | |
Preservative | 1.0 |
Phase E | |
Imindinyl LS 9045 (BASF) | 3.0 |
Procedure | |
Predisperse pigments in the oils of phase A (shaker 2-5 cycles (10 min each), add phase B and heat both phases together up to 85°C with high shear mixing. Disperse gums in phase C in the water with vigorous mixing while heating up to 85°C, after homogenous gel form, add all ingredients of phase D with moderate mixing. Add phase A/B into phase C/D with high shear mixing. Homogenize at 55°C. Cool down to the ambient temperature with moderate mixing. Add phase E while temperature drops to below 40°C. | |
Properties | |
Viscosity Brookfield RVT, 23°C (spindle#5, 10rpm)u20146,000 cPs; pHu20146.3. | |
More Information | |
DeWolf Chemical, Inc. 800-521-0065 Fax: 401-434-5306 Email: orders@dewolfchem.com www.dewolfchem.com |